Vivo T1 5G was launched in India which features a 6.58-inch full-HD+ IPS LCD display with 120Hz refresh rate, powered by a Snapdragon 695 5G SoC, paired with up to 8GB of RAM and 128GB of onboard storage. The device sports a triple rear camera setup with a 50 MP primary sensor.
In this guide, we have the latest stock ROM flash file for the Vivo T1 5G PD2165F (V2141) powered by a Qualcomm Snapdragon 695 processor. To install the firmware flash file, we need software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So without further wasting our time, let’s understand what stock firmware flash file is.
Page Contents
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo T1 5G Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Vivo T1 5G
- You can fix the boot loop issue on Vivo T1 5G
- Fix Unfortunately, the app has stopped errors on Vivo T1 5G
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo T1 5G
- To Reset or Remove FRP on your device
- Restore Vivo T1 5G back to Factory State
Firmware Details:
- Device Name: Vivo T1 5G PD2165F | V2141
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash tool
- Processor: Qualcomm Snapdragon 695 Processor
- Android Version: Android 12 with FuntouchOS 12
How to Install Vivo T1 5G V2141 PD2165F Flash File
Before installing the Stock ROM on your Vivo T1 5G, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo T1 5G PD2165F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: Download AFTool | QFil Flash Tool or QPST Flash tool
- Download Drivers: Qualcomm USB Drivers and Vivo USB Drivers
Download Flash Files
Firmware Detail | Download Link |
Flash File Name: PD2165F_EX_A_13.1.12.11 File Size: 5.69 GB File Type: OTA Android Version: Android 13 |
Download |
Flash File Name: PD2165F_EX_A_12.0.11.10 File Size: 4.4 GB File Type: OTA Android Version: Android 12 |
Download |
Flash File Name: PD2165F_EX_A_12.0.8.33 File Size: 4.4 GB File Type: OTA Android Version: Android 12 |
Download |
Flash File Name: PD2165F_EX_A_12.0.11.8 File Size: 4.4 GB File Type: OTA Android Version: Android 12 |
Download |
Flash File Name: PD2165F_EX_A_12.0.11.4 File Size: 4.4 GB File Type: OTA Android Version: Android 12 |
Download |
Flash File Name: PD2165F_EX_A_12.0.8.19.W30.V000L1 File Size: 3.3 GB File Type: OTA Android Version: Android 12 |
Download |
Flash File Name: PD2165F_EX_A_1.6.22 File Size: 3.3 GB File Type: OTA Android Version: Android 11 |
Download |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via QFIL Tool:
Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.
Guide to Install Stock ROM using QFIL Tool
Method 3: Instructions to Install via MSM Download tool:
- Download the MSM Download tool, firmware, and drivers on your PC.
- Now install the USB drivers.
- Place the MSM download tool and firmware in the same folder
- Open the MSM download tool and connect your device to PC/Laptop
- Once you connect, it will automatically load the firmware; if not, select it manually.
- Click on the start button and wait patiently to complete the installation process.
- Once it is done! remove your device from your PC. That’s it!
That’s it, guys. We hope that you’ve installed the Stock Firmware on your Vivo T1 5G device successfully. Feel free to ask in the comments below for any queries.