Vivo T2 5G PD2251F Firmware Flash File (Stock ROM)

In this guide, we have the latest stock Firmware flash file for the Vivo T2 5G PD2251F powered by a Qualcomm Snapdragon 695 5G processor. To install the firmware flash file, we need software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.

Vivo T2 is the latest mid-range smartphone powered by a Snapdragon 695 5G SoC coupled with up to 8GB of RAM and backed by a 4500mAh battery with 44W fast charging. It sports a dual rear camera unit and is available in a single storage configuration. The phone runs on Android 13 with FunTouch OS 13 on top.

This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So, without wasting time, let’s understand what a stock firmware flash file is.

Vivo T2 5G PD2251F Firmware Flash File (Stock ROM)

Vivo T2 5G Device Overview:

The Vivo T2 5G, a dual-SIM (Nano-SIM) smartphone, operates on Funtouch OS 13, built over the Android 13 platform. It features a 6.38-inch AMOLED display with a resolution of 1,080×2,400 pixels with a 90Hz refresh rate. The device runs the latest Qualcomm Snapdragon 695 SoC, paired with up to 8GB of RAM and an additional 8GB of virtual RAM for smoother multitasking.

In terms of camera, the T2 5G features a dual-camera arrangement at the back. This includes a 64-megapixel primary camera with an f/1.79 lens and a 2-megapixel depth sensor sporting an f/2.4 lens. This camera suite comes with various shooting modes like portrait, micro, panorama, and more. A 16-megapixel camera with an f/2.0 lens is nestled at the front for selfies and video calls.

Storage-wise, the device offers 128GB internally, which can be extended up to a whopping 1TB via a microSD card. Its wide array of connectivity features encompasses 5G support, Wi-Fi 6, Bluetooth 5.1, and a USB Type-C port. An assortment of sensors like an accelerometer, ambient light sensor, and gyroscope is embedded, and it incorporates an in-display fingerprint scanner for secure access. Vivo T2 5G is backed by a 4500mAh battery, complemented by a 44W fast-charging capability that can juice up the battery to 50% in approximately 25 minutes. The device’s sleek profile measures 158.91×73.53×7.80mm and weighs 172 grams.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Vivo T2 5G Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adware from Vivo T2 5G
  • You can fix the boot loop issue on Vivo T2 5G
  • Fix Unfortunately; the app has stopped errors on Vivo T2 5G
  • Fix Network related issue
  • Patch Boot image to Root using Magisk
  • You can unroot Vivo T2 5G
  • To Reset or Remove FRP on your device
  • Restore Vivo T2 5G to Factory State

Firmware Details:

  • Device Name: Vivo T2 5G PD2251F
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: QFil Flash tool
  • Processor: Qualcomm Snapdragon 695 5G
  • Android Version: Android 11 with FuntouchOS 12

How to Install Vivo T2 5G PD2251F Flash File

Before installing the Stock ROM on your Vivo T2 5G, you should download the firmware flash file. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Download Flash Files

Firmware Detail Download Link
Flash File Name: PD2251F_EX_A_13.0.7.4
File Size: 4.5 GB
File Type: OTA
Android Version: Android 13
Download
Flash File Name: PD2251F_EX_A_13.0.6.26
File Size: 7.9 GB
File Type: OTA
Android Version: Android 13
Download

Method 1: Instructions to Install via Recovery:

First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link below to install the OTA update on the Vivo device.

Guide to Install Vivo Firmware on any Vivo smartphone

Method 2: Instructions to Install via QFIL Tool:

Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.

Guide to Install Stock ROM using QFIL Tool

Method 3: Instructions to Install via MSM Download tool:

  1. Download the MSM Download tool, firmware, and drivers on your PC.
  2. Now install the USB drivers.
  3. Place the MSM download tool and firmware in the same folder
  4. Open the MSM download tool and connect your device to your PC/Laptop
  5. Once you connect, it will automatically load the firmware; if not, select it manually.
  6. Click on the start button and wait patiently to complete the installation process.
  7. Once it is done! Remove your device from your PC. That’s it!

That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo T2 5G device. Feel free to ask any questions in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.