Download and Install Vivo V17 Android 11 (FuntouchOS 11) Update

The handset packs a bigger 4,500mAh battery with 18W fast charging support. It has a 3.5mm headphone jack, Bluetooth 5.0, Wi-Fi 802.11 a/b/g/n/ac, GPS, A-GPS, GLONASS, Type-C port, FM Radio, etc. In terms of the sensors, it features ambient light, an under-display fingerprint sensor, gyroscope, proximity, accelerometer, compass.

Download Vivo V17 Android 11 (Funtouch OS 11) Update

Here you can download the official Android 11 for the Vivo V17 based on Funtouch OS 11.

Check Software Update:

Before going to the manual firmware upgrade process, if you feel that your device isn’t receiving the OTA update notification for a while, then you can check for the software update manually. In order to do this:

Go to the device Settings > System updates. It will search for the software update and you will get notified if a new update is available on your device. Simply grab the Android 11 version by downloading and installing it.

Additionally, it’s recommended to maintain the phone charge at least up to 50%-60% and connect your device to Wi-Fi for a faster and stable download.

Update Guide: How to Flash Vivo Firmware on your device

How to Install Vivo V17 Android 11 (Funtouch OS 11) Update

Before installing Android 11 on your Vivo V17, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below.

Pre-Requirements:

• Supported device: Vivo V17 PD2038F
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Flash Tool: Download AFTool | QFil Flash Tool or QPST Flash tool
• Download Drivers: Qualcomm USB Drivers and Vivo USB Drivers

Method 1: Instructions to Install via QFIL Tool:

Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the Android 11 using the QFIL tool

Guide to Install Firmware File using QFIL Tool

Method 2: Instructions to Install via MSM Download tool:

1. Download the MSM Download tool, firmware, and drivers on your PC.
2. Now install the USB drivers
3. Place the MSM download tool and firmware in the same folder
4. Open the MSM download tool and connect your device to PC/Laptop
5. Once you connect, it will automatically load the firmware, if not select it manually.
6. Click on the start button and wait patiently to complete the installation process.
7. Once it is done! remove your device from your PC. That’s it!

That’s it, guys. We hope that you’ve installed Android 11 on your Vivo V17 device successfully. Feel free to ask in the comments below for any queries.

In the meantime, if you liked this content and want to read more content, for more such awesome coverage, you can head over to our check out our Windows Guides, Gaming Guides, Social Media Guides, iPhone, and Android Guides to read more. Make sure to subscribe to our YouTube Channel for awesome videos related to Android, iOS, and Gaming. So, until the next post…Cheers!