In this guide, we have the latest stock Firmware flash file for the Vivo V30 PD2323F powered by Qualcomm SM7550-AB Snapdragon 7 Gen 3 processor. To install the firmware flash file, we need software called the QFil Flash tool which can be helpful to flash the stock ROM on your device. The method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the official flash file.
This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So, without wasting time, let’s understand what a stock firmware flash file is.
Page Contents
Vivo V30 Device Overview:
The Vivo V30, released on March 4, 2024, features a sleek design with dimensions of 164.4 x 75.1 x 7.5 mm and a weight of 186 g. It boasts a glass front, plastic frame, and glass back, supporting either a Single SIM (Nano-SIM) or Dual SIM (Nano-SIM, dual stand-by) configuration. The device is IP54 rated for dust and splash resistance. Its display is a 6.78-inch AMOLED screen with 1 billion colors, HDR10+, a 120Hz refresh rate, and a peak brightness of 2800 nits. The screen resolution is 1260 x 2800 pixels with a 20:9 aspect ratio and approximately 453 ppi density, protected by Schott Alpha glass. The Vivo V30 runs on Android 14 with Funtouch 14, powered by the Qualcomm SM7550-AB Snapdragon 7 Gen 3 chipset, an octa-core CPU, and an Adreno 720 GPU. Storage options include 128GB with 8GB RAM, 256GB with 8GB or 12GB RAM, and 512GB with 12GB RAM, all utilizing UFS 2.2.
The Vivo V30’s camera system includes a triple rear setup with a 50 MP wide lens, a 50 MP ultrawide lens, and a 2 MP sensor (market/region dependent). The rear camera supports 4K and 1080p video recording with gyro-EIS. The front camera is a 50 MP wide lens capable of 4K and 1080p video recording, complemented by a dual-LED flash. Audio features include a loudspeaker and 24-bit/192kHz Hi-Res audio, with Snapdragon Sound in specific markets/regions, though it lacks a 3.5mm jack.
Connectivity options include Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.4, GPS, GALILEO, GLONASS, QZSS, BDS, and NFC (market/region dependent). It features a USB Type-C 2.0 port with OTG support and various sensors, including an under-display optical fingerprint sensor, accelerometer, gyro, proximity sensor, and compass. The device is equipped with a non-removable Li-Ion 5000 mAh battery, supporting 80W wired charging (100% in 48 minutes, advertised) and reverse wired charging.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Vivo V30 Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adware from Vivo V30
- You can fix the boot loop issue on Vivo V30
- Fix Unfortunately; the app has stopped errors on Vivo V30
- Fix Network related issue
- Patch Boot image to Root using Magisk
- You can unroot Vivo V30
- To Reset or Remove FRP on your device
- Restore Vivo V30 to Factory State
Firmware Details:
- Device Name: Vivo V30 PD2323F
- ROM Type: Stock ROM
- Gapps File: Included
- Tool Supported: QFil Flash tool
- Processor: Qualcomm SM7550-AB Snapdragon 7 Gen 3
- Android Version: Android 14, Funtouch 14
How to Install Vivo V30 PD2323F Flash File
Before installing the Stock ROM on your Vivo V30, you should download the firmware flash file. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Vivo V30 PD2323F
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Flash Tool: Download AFTool | QFil Flash Tool or QPST Flash tool
- Download Drivers: Qualcomm USB Drivers and Vivo USB Drivers
Download Flash Files
| Firmware Detail | Download Link |
| Flash File Name: PD2323F_EX_A_14.0.4.23 File Size: 9.56 GB File Type: OTA Android Version: Android 14 |
Download |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link below to install the OTA update on the Vivo device.
Guide to Install Vivo Firmware on any Vivo smartphone
Method 2: Instructions to Install via QFIL Tool:
Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.
Guide to Install Stock ROM using QFIL Tool
Method 3: Instructions to Install via MSM Download tool:
- Download the MSM Download tool, firmware, and drivers on your PC.
- Now install the USB drivers.
- Place the MSM download tool and firmware in the same folder
- Open the MSM download tool and connect your device to your PC/Laptop
- Once you connect, it will automatically load the firmware; if not, select it manually.
- Click on the start button and wait patiently to complete the installation process.
- Once it is done! Remove your device from your PC. That’s it!
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Vivo V30 device. Feel free to ask any questions in the comments below for any queries.