Samsung Galaxy A51 was launched in India in 2020 with Android 10 with One UI 2.0 on top and features a 6.5-inch Super AMOLED full-HD+Display with an in-display fingerprint sensor. Under the hood, the phone has an octa-core Exynos 9611 SoC, coupled with 6GB of RAM. On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Samsung Galaxy A51, codenamed “a51.” If you’re looking to install the pure version of Android 14, then you’re in the right place.
Page Contents
Samsung Galaxy A51 Overview
The Samsung Galaxy A51 sports a 6.5-inch FHD+ Super AMOLED Infinity-O display with an aspect ratio of 20:9. The display also has an 87.4% screen-to-body ratio and a pixel density of 405 PPI. The display also contains the in-display fingerprint scanner and Corning Gorilla Glass 3 protects the device. The device has a plastic back and the same plastic frame too.
Underneath the device, the in-house octa-core Exynos 9611 SoC which pairs Mali-G72 MP3 powers the Galaxy A51. This SoC is built on the 10nm process and this also pairs with 6 and 8GB of RAM and 64 and 128GB of internal storage. Further, the storage is expandable via MicroSD card up to 512GB. The device has a dedicated SIM slot where at a time you can insert two nano SIM’s and a micro SD card.
Talking about optics, the Galaxy A51 has a quad rear camera set up in an L shaped arrangement. This quad-camera setup includes a primary 48MP sensor with an f/2.0 aperture value. This sensor pairs with a 5MP secondary depth sensor with f/2.2 aperture. Further, it also sports a 5MP tertiary macro sensor with f/2.4 aperture value. Finally, the device also sports a 12MP ultra-wide camera with f/2.2 aperture value. To the front, the device sports a 32MP sensor with an f/2.2 aperture value.
The Galaxy A51 packs a 4000 mAh battery which supports up to 15W quick charge and also charges over type c. The device runs one One UI 2.0 which is based on the latest Android 10. It is available in four colors namely the Prism Crush Black, White, Blue, Pink. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, GPS with A-GPS, GLONASS, GALILEO, BDS. It has also support for NFC on board.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? You Tell Us
How To Install AOSP Android 14 on Galaxy A51 (a51)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Galaxy A51 (a51) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Galaxy A51.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Samsung USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Samsung USB Drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Galaxy A51’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Galaxy A51.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Galaxy A51 (a51) here.
| CrDroid OS | XDA Development Page |
| Evolution X | XDA Development Page |
| Lineage OS 21 | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Galaxy A51 is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Galaxy A51 comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Galaxy A51, flashing the ported Android 14 is an option. Although it seems like the Galaxy A51 won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.