How to Install Custom ROM on Samsung Galaxy A10S

In this tutorial, we will guide you to install the custom ROM on Samsung Galaxy A10S (SM-A107F). The device came out of the box with Android 9.0 Pie and was later upgraded to Android 11. If you want a vanilla-flavored custom ROM, you can try the GSI build on your phone.

Well, If you are here, then you may pIn this tutorial, we will guide you to install the custom ROM on Samsung Galaxy A10S (SM-A107F). As you read our title, we can guide you on installing the latest custom ROM on Samsung Galaxy A10S based on GSI build.

Also Read: Samsung A10S SM-A107F FRP Bypass | Use EFT, CM2, UMT

How to Install Custom ROM on Samsung Galaxy A10S

When you buy a new phone, it comes with so-called stock ROM or stock firmware which basically means a pre-installed operating system. This ROM usually comes with some limited functionality defined by the OEM (phone manufacturer). Whereas a custom ROM is developed by using AOSP also known as Android Open Source Project. Yes, we all know that Android is open-source and therefore any developer can edit the code, or recompile it according to his or her need. You can read our complete article to understand the difference between Custom ROM and Stock ROM.

Flashing the ROM in Samsung Galaxy A10S is easy! All you need to do is follow the instructions carefully. If you are a newbie, then you need to understand that before flashing, you must unlock the bootloader on your Samsung Galaxy A10S. To unlock the bootloader, follow our guide on how to unlock the bootloader on any Realme device.

If you already unlocked the bootloader, then you can simply follow our guide to install the custom ROM on Samsung Galaxy A10S. Before that, let’s understand What is a GSI build.

Samsung Galaxy A10s Specifications:

Samsung Galaxy A10s was announced in August 2019 which sports a 6.2-inch IPS LCD display with a screen resolution of 1520 x 720 pixels with 271 PPI pixel density.

Samsung Galaxy A10s is powered by a Mediatek MT6762 Helio P22 (12 nm) chipset coupled with 2GB of RAM and 32GB of internal storage. It also supports a 512GB external memory card. The device came out of the box with Android 9.0 Pie and was backed by a 4000 mAh battery (Non-removable).

As far as the camera is concerned, the device has a Dual-camera setup with 13MP + 2MP primary sensors and a selfie camera with an 8MP lens. Other connectivity option includes 4G-VoLTE, GPS, Glonass, Bluetooth, Mobile Hotspot, accelerometer, ambient light sensor, gyroscope, proximity sensor, and compass/ magnetometer. etc. The Samsung Galaxy A10s come with a rear fingerprint sensor feature.

What is GSI Stands for?

GSI stands for Generic system image which is an Android System image that can be used to replace the current installed Android version with a new one. It is a pure Android with an unmodified Android Open Source Project (AOSP) code. With Android 8.1, Google introduced the project treble support for many devices and now with Android 9.0 Pie, Google finally added the API level 28 to support Generic System Images to all app developers to install and run the latest Android GSIs on a variety of existing Android devices. To know more: Read here

How to Install Custom ROM on Samsung Galaxy A10S

To install, as we said, you need to unlock the bootloader and must have a TWRP (to install via a  device) or a PC (to install via Fastboot). Yes, there are two methods to install the custom ROM GSI on Samsung Galaxy A10S (SM-A107F).

Disclaimer

AOSP GSIs which is still marked as a pre-release. Even on a device that runs Pie GSIs nicely, it’s still possible to get broken media, camera, RIL, or even flat-out no-boot. You are strongly advised to try PHH’s original and then identify/report issues there, before moving onto other GSIs that are based on his work. Please report bugs on the same thread related to the ROM.

We’re at GetDroidTips won’t be responsible for any kind of damage or error that occurs to your handset while or after following this guide. This is a Custom ROM and may contain some of the bugs or stability issues. We can’t recommend you to use this firmware as your daily driver. Proceed at your own risk.

Pre-Requirements:

Note:

A only arm32 – arm avN
A only arm64 – arm64 avN
A/B arm64 – arm64 bvN
A/B arm32 – arm bvN

Download Links:

Unofficial Android 12 Build

ROM Thread/Download Partition Style Architecture
LeOS-S XDA / Download A/B arm64 – binder
Pixel Experience XDA / Download A/B arm64 – binder
LineageOS XDA / Download A/B arm64 – binder
ProtonAOSP Download A/B arm64 – binder
OctaviOS Telegram/Download A/B arm64 – binder
ArrowOS Telegram/Download A/B arm64 – binder
CherishOS Telegram/Download A/B arm64 – binder
SuperiorOS Telegram/Download A/B arm64 – binder

Install via TWRP Recovery:

This guide is for those users who have installed TWRP recovery on your device. If your device is not supported, you can try the next method to install the custom ROM via GSI build.

  1. To install via TWRP, you need to factory reset your device using TWRP
  2. Go into the Wipe option and Swipe to Factory Reset.
  3. Transfer the GSI build to your Samsung Galaxy A10S using a USB Cable.
  4. Once you have moved, you can remove your USB cable.
  5. In your TWRP, tap on the install button –> Change type to Install Image and find the GSI you have moved in the 3rd step.
  6. Confirm the flash by choosing the system partition
  7. Once it is done, you can reboot your device and wait for a few minutes to boot up.

Flash via Fastboot

  1. First, do the factory reset on Samsung Galaxy A10S. There are two methods to do it, follow anyone.
    • Factory Reset When Powered On: To install without TWRP, you have to factory reset using your Umdigi A7 Pro factory reset option.
    • Factory Reset via Stock Recovery: Reboot your Samsung Galaxy A10S into stock recovery using a button combination or ADB command.
      adb reboot recovery
    • In your Stock Recovery, navigate using the Volume UP and DOWN button.
  2. Make sure to extract the downloaded GSI build.
  3. After resetting the factory ROM, you can now boot your device into bootloader mode using the adb command adb reboot bootloader. bootloader mode
  4. Now open the extracted folder of GSI build, there, now open the command prompt window by holding the SHIFT KEY and Right Mouse click.
  5. In your command window, enter the command fastboot erase system
  6. To flash the system image, enter a command in the following format: fastboot -u flash system name_of_system.img
  7. Wait for the image to flash, it could take a few minutes. Once it has been completed, reboot your device either manually via power key or by entering fastboot reboot and wait for a few minutes to boot up.

We hope that this guide is helpful to you and you have successfully installed the Custom ROM on your Samsung Galaxy A10S handset easily. If in case anything goes wrong or if you have any queries, feel free to ask in the comments below.

Credits to all the developers from the XDA forum and 4PDA forum

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.