How to Root Realme Narzo 50A RMX3430 using Magisk without TWRP

Pre-Requirements

• You need to unlock the bootloader on your Realme Narzo 50A
• Your phone should have a battery juice of more than 60% at least.
• Keep a backup of your device data at first. Therefore, if anything goes wrong, you can get back the important data.
• The image file in this article is supported by the Realme Narzo 50A model only. DO NOT try to flash it on other models.
• You will also require a PC/Laptop and a USB cable in order to connect your device with the computer.
• You should download all the necessary files, tools, and drivers from below accordingly.

Required Downloads:

• Download ADB & Fastboot files (Windows/MAC)
• Realme USB Drivers – Download and install it on your computer
• Download the latest Realme Narzo 50A Firmware Flash File and move it to the PC

1. Download and Extract the OZIP Firmware:

1. How to Patch the Boot Image using Magisk?

• Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
• Launch Magisk Manager. When a popup appears asking to install Magisk, select INSTALL and choose install again.
• Tap on “Patch Boot Image File”.
  

  

• Navigate to internal storage and select your phone’s boot image that you transferred earlier.
• Wait for a couple of seconds. Magisk will start patching the boot image.
• Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.

Now you can follow the second step to flash the patched boot image file.

2. Steps To Install the Patched Boot Image on Realme Narzo 50A

Follow the proper guide to install Patched Boot Image on Realme Narzo 50A from the below link:

• Now, extract the ADB & Fastboot tool, then move the patched boot image file to the same folder.
• Press and hold down the Shift key + right-mouse-click to open the command window/PowerShell.
• Next, enter the following command in order to flash the “patched_boot.img” to install Magisk and root your Android device:

fastboot flash boot patched_boot.img

• For devices with an A/B partition system, you have to use the following commands:

fastboot flash boot_a patched_boot.img

fastboot flash boot_b patched_boot.img

Please replace [patched_boot.img] with the name of the boot image file you downloaded followed by the .img extension.

• Wait for the flashing process to complete.
• Finally, type in the command to reboot your device.

fastboot reboot

• That’s it.