Download Samsung Galaxy Z Flip 4 Firmware Flash File (SM-F721B)

Samsung Galaxy Z Flip 4 was launched globally, the fourth iteration of the foldable smartphone lineup, the Galaxy Z series.  The device features a 7.6-inch Dynamic AMOLED 2X Infinity Flex Display, Snapdragon 8+ Gen 1 SoC, 4,400mAh battery, and triple rear camera setup. The device runs on Android 12 with One UI 4.1.1 on top.

On this page, we have shared the download link and guide to installing the Samsung SM-F721B (Galaxy Z Flip 4) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here you will find all stock firmware zip files for all the supported regions with Samsung SM-F721B.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter, or even you can downgrade the device anytime.

Samsung Galaxy Z Flip 4 Device Overview:

The Samsung Galaxy Z Flip 4 features one 6.7 inches Foldable Dynamic AMOLED 2X panel and a 1.9 inches Super AMOLED panel as the cover display. The foldable display runs at a 120 Hz refresh rate. The first unfolded panel has a resolution of 260 x 512 pixels, and the second folded panel has a resolution of 1080 x 2640 pixels.

Advertisements

Under the hood, we get the Qualcomm Snapdragon 8+ Gen 1 processor built on a 4nm manufacturing process. It is an octa-core processor with one Cortex-X2 core clocked at 3.19 GHz, three Cortex-A710 cores clocked at 2.75 GHz, and four Cortex-A510 cores clocked at 1.80 GHz. For handling the graphics-intensive tasks, we have the Adreno 730. The smartphone comes with Android 12L out of the box with One UI 4.1.1 skin running on top.

In terms of optics, we get a dual camera setup at the rear and a single selfie camera at the front. The dual rear camera setup consists of a 12 MP primary sensor with an f/1.8 lens and a 12 MP ultrawide sensor with an f/2.2 lens. The selfie camera is a 10 MP sensor paired with an f/2.4 lens. Both the front and rear camera systems can capture 4K videos.

The smartphone comes with three storage options: 128GB internal storage + 8GB RAM, 256GB internal storage + 8GB RAM, and 512GB internal storage + 8GB RAM. We do not get any microSD slots for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.2, GPS, NFC, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, gyro, proximity, compass, and barometer. Powering it all is a 3700 mAh battery that can be topped up quickly using a 25W power adapter which is not included in the box.

Samsung Galaxy Z Flip 4 SM-F721B Flash Files:

Flash File Name: SM-F721B_ F721BXXU1AVIA_12.0_file.zip
Build Number: F721BXXU1AVIA
Security Patch: September 2022
Version: Binary 1 U1,
Model:
SM-F721B
Android Version: 12.0
Download
Flash File Name: SM-F721B_F721BXXU1AVHH_12.0_file.zip
Build Number: F721BXXU1AVHH
Security Patch: July 2022
Version: Binary 1 U1,
Model:
SM-F721B
Android Version: 12.0
Download
Flash File Name: SM-F721B_F721BXXU1AVGA_12.0_file.zip
Build Number: F721BXXU1AVGA
Security Patch: July 2022
Version: Binary 1 U1,
Model:
SM-F721B
Android Version: 12.0
Download

Steps to Install Firmware File on Galaxy Z Flip 4 SM-F721B

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy Z Flip 4, let us take a look at the pre-requirements first.

Advertisements

Pre-Requirements: 

  • This Guide is for Samsung Galaxy Z Flip 4 SM-F721B
  • You need a Windows PC/Laptop and a USB cable to flash the firmware.
  • Charge your device with a minimum of 50% battery backup.
  • You have to download the latest Samsung USB Drivers and install them on your PC.
  • Make sure that you have ODIN Software installed on your PC.
  • Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy Z Flip 4.

Instructions to Install:

Disclaimer:

We’re at GetDroidTips won’t be responsible for any kind of damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
  1. Download the Samsung SM-F721B flash file
  2. Extract the contents of the firmware flash file zip.
  3. Launch the ODIN application
  4. Load the firmware files in their appropriate section
  5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
  6. Notice that the CO port will light up on Odin once you connect your phone.
  7. Click the Start button to install the firmware on your Samsung device.
  8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Advertisement

Check out our full-depth video guide as well.

Advertisements

We hope that this guide will be helpful to you. If in case you’re facing any issues, feel free to ask in the comments below.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.