How to Install Stock ROM on Tecno F1 [Firmware Flash File]

Did you accidentally brick your Tecno F1 device and want to flash the stock firmware again? If so, then we will help you to install the firmware flash file on the Tecno F1 device. Since Tecno F1 is a MediaTek MT6580 soc-based device, we need to use the SP Flash tool to flash the Stock Firmware on this device. If you have never done this before then don’t worry. We will guide you through all the necessary steps.

If you’re facing any kind of software issue in your device, then installing the firmware flash file on Tecno F1 will solve all the problems. Whether it be lagging issues, software issues, or performance issues.

Tecno F1 Firmware Flash File (Stock ROM Guide)

How to Flash Firmware File on Tecno F1

Installing Stock ROM on Tecno F1 is an easy process by using the SP Flash tool. SP Flash tool is also known by the name of Smartphone Flash Tool. Many people believe that installing Stock ROM will cause more problems to their device. But this isn’t true at all. If you’re installing Stock ROM for the first time, then do not worry. At GetDroidTips, we will guide you through every step while flashing stock firmware on Tecno F1.

To make this guide easier for new users, we are going to divide this into multiple parts. First, we will help you to set up device drivers and Flash software. Then we will begin with the actual process followed by the downloading Stock ROM. So are you ready?

Advantages of Installing Stock ROM

Here are some of the advantages of installing stock ROM on your Tecno F1:

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Tecno F1
  • You can fix the boot loop issue on Tecno F1
  • Fix Unfortunately, the app has stopped error on Tecno F1
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Tecno F1
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Tecno F1 back to Factory State

Firmware Details:

  • Device Supported: Tecno F1
  • Tool Supported: SP Flash tool
  • Processor: MediaTek MT6580
  • Android OS: 8.1 Oreo Go
  • File: Software Update

Steps to Install Firmware Flash File on Tecno F1

Now, before we get straight to the Steps to Install Stock Firmware on Tecno F1, let us take a look at some of the prerequisites.

Pre-Requisites

  • This guide will only work for Tecno F1
  • You should have a working Windows PC/Laptop
  • Charge the device battery up to 50%
  • Take a backup of your  Device. This includes any important photos, contacts, messages, emails, etc.
  • Download the SP Flash tool and install it on your PC.
  • VCOM driver Download – Install the VCOM Driver on your computer (still compatible with MT67xx phones)
  • Download and install Tecno USB drivers on your Windows PC.

Once you have the above prerequisites, you can proceed to Instructions to Install Stock ROM on Tecno F1.

Download Flash Files

Software Details Download Link
Flash File Name: F1-VP510EFG-GO-ETEC-181220V6
File Size: 680 MB
Android Version: 8.1 Oreo Go
Download Link
Flash File Name: F1-VP510EFG-GO-190119V7
File Size: 680 MB
Android Version: 8.1 Oreo Go
Download Link
Flash File Name: F1-VP510EFG-GO-ETEC-191211V13
File Size: 680 MB
Android Version: 8.1 Oreo Go
Download Link
Flash File Name: F1-VP510EFG-GO-191205V16
File Size: 680 MB
Android Version: 8.1 Oreo Go
Download Link
Flash File Name: F1-VP510EFG-GO-180804V3
File Size: 680 MB
Android Version: 8.1 Oreo Go
Download Link

Instructions to Install:

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Tecno F1, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your Tecno F1
Follow Complete Tutorial Watch Video Tutorial

So that’s it guys, this is how you can fix all the issues in your Tecno F1 by flashing Stock ROM. We hope that you find this post useful. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.