Tecno Camon 30 Pro (CL8) Firmware Flash File

The Tecno Camon 30 Pro 5G was first revealed in February of this year at the Mobile World Congress (MWC) 2024. These smartphones are equipped with MediaTek chipsets and each has a 5,000mAh battery with support for up to 70W wired fast charging.

This guide provides step-by-step instructions for installing the firmware flash file on the Tecno Camon 30 Pro (CL8). This specific model comes with pre-installed Android 14 (HIOS). If you need to resolve common issues such as boot loops, pattern lock removal, FRP lock bypass, IMEI repair, or extraction of DA (download agent) files, then this guide is for you.

To install the firmware flash file on the Tecno Camon 30 Pro (CL8), you will need to download the SP Flash tool, also known as the Smartphone Flash tool. The method presented here is simple and user-friendly. Additionally, we have included video tutorials and detailed instructions to guide you through the firmware file flashing process.

Tecno Camon 30 Pro (CL8) Firmware Flash File

Tecno Camon 30 Pro Specification:

The Tecno Camon 30 Pro 5G features a 6.78-inch full-HD+ (2,436 x 1080 pixels) AMOLED display with a 144Hz refresh rate. It is powered by a MediaTek Dimensity 8200 chipset paired with 12GB of RAM and 512GB of onboard storage. The phone runs on Android 14-based HiOS 14.

For the camera, the Tecno Camon Pro 5G includes a 1/1.56-inch 50-megapixel primary sensor with optical image stabilization (OIS) support, a 50-megapixel sensor with an ultra-wide-angle lens, and a 2-megapixel depth sensor at the back alongside dual rear flash units. The front camera has a 50-megapixel sensor with autofocus.

The Tecno Camon 30 Pro 5G is supported by a 5,000mAh battery with 70W fast charging via a USB Type-C port. It also comes with an in-display fingerprint sensor.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Tecno Camon 30 Pro Stock ROM flash file on your computer.

  • Unbrick Your Device: Use the Stock ROM file to revive your dead Tecno Camon 30 Pro.
  • Repair IMEI: Fix or repair the IMEI on your device using DB files from the Stock ROM.
  • Remove Malware/Adware: Eliminate any malware or adware from your Tecno Camon 30 Pro.
  • Resolve Boot Loop Issues: Select and fix boot loop problems on your Tecno Camon 30 Pro.
  • Fix App Errors: Address “Unfortunately, the app has stopped” errors on your device.
  • Network Issues: Fix network-related problems on your Tecno Camon 30 Pro.
  • Patch Boot Image for Root: Use Magisk to root with the Mediatek or Spreadtrum Guide.
  • Unroot Your Device: Remove root access from your Tecno Camon 30 Pro.
  • Reset or Remove FRP: Follow the Mediatek or Spreadtrum FRP Guide to reset or remove FRP on your device.
  • Restore Factory State: Return your Tecno Camon 30 Pro to its original factory state.
  • Bypass Pattern Lock: Unlock your device by bypassing the pattern lock.

How to Flash Tecno Camon 30 Pro (CL8) Firmware File

You should download the firmware flash file before installing the Stock ROM on your Tecno Camon 30 Pro. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the importance of stock firmware and the firmware details below.


Tecno Camon 30 Pro (CL8) Flash Files

Software Details Download Link
Flash File Name: CL8_MT6895_OP_V1043_240315_MXML.zip
Model Number: CL8
File Size: 5.28 GB
Download Link

Instructions to Install: via SP Flash tool


GetDroidTips will not be responsible for any hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Ensure you follow and download all the required files and flash tools on your PC.
  2. Open the Flash tool exe file to open the SP Flash Tool User Interface
  3. Tap the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button.
  5. To start the upgrade process of the stock ROM on your Tecno Camon 30 Pro, you need to turn off your device, hold the Volume Down and Volume Up keys together, and Connect your Phone to your PC/Laptop using a USB Cable. (Keep the Volume Down and Volume Up buttons until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware.
  7. Wait for a few minutes; if you see a green button on your Flash tool, the upgrading process has been completed.
  8. That’s it! You can reboot your Tecno Camon 30 Pro.

Follow Complete Tutorial

Watch the YouTube Tutorial Guide

That’s it, guys. We hope you’ve installed the Stock Firmware on your Tecno Camon 30 Pro (CL8) device. Feel free to ask any questions in the comments below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.