Tecno Phantom X2 AD8 Firmware Flash File | Stock ROM (Android 13)

Tecno Phantom X2 5G features a 6.8-inch curved AMOLED screen with a 120Hz refresh rate and 1,080×2,400 pixels resolution. A MediaTek Dimensity 9000 SoC powers it and uses Android 12-based HiOS 12.0 for smooth operation. The phone sports a triple camera setup at the back, featuring a top-notch 64-megapixel primary sensor with OIS support.

This tutorial will guide you on installing the firmware flash file on Tecno Phantom X2 (AD8). The device came out of the box with Android 12.0 (HIOS). If you want to fix your device’s common issues like boot loop, remove pattern lock, bypass FRP lock, repair IMEI, or extract DA (download agent) file, then this guide is for you.

To install the firmware flash file on Tecno Phantom X2 (AD8), you need to download the SP Flash tool (also known as the Smartphone flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make flashing the firmware file easier.

Tecno Phantom X2 AD8 Firmware Flash File | Stock ROM (Android 13)

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Tecno Phantom X2 Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adware from Tecno Phantom X2
  • You can fix the boot loop issue on Tecno Phantom X2
  • Fix Unfortunately; the app has stopped errors on Tecno Phantom X2
  • Fix Network related issue
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • You can unroot Tecno Phantom X2
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
  • Restore Tecno Phantom X2 to Factory State
  • Bypass Pattern lock on your device

How to Flash Tecno Phantom X2 (AD8) Firmware File

You should download the firmware flash file before installing the Stock ROM on your Tecno Phantom X2. Then download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.


Download Flash Files

Software Details Download Link
Flash File Name: AD10-H832AB-T-TR-230202V2649

Android Version: Android 13

Download Link

Instructions to Install: via SP Flash tool


GetDroidTips will not be responsible for any hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Ensure you follow and download all the required files and flash tools on your PC.
  2. Open the Flash tool exe file to open the SP Flash Tool User Interface
  3. Tap the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button.
  5. To start the upgrade process of stock ROM on your Tecno Phantom X2, you need to turn off your device and hold the Volume Down and Volume Up keys together and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware.
  7. Wait for a few minutes; if you see a green button on your Flash tool, the upgrading process has been completed.
  8. That’s it! You can reboot your Tecno Phantom X2.

Follow Complete Tutorial

That’s it, guys. We hope you’ve installed the Stock Firmware on your Tecno Phantom X2 (AD8) device. Feel free to ask any questions in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.