The Tecno Spark 10C arrives with a 6.6-inch HD+ display with 90Hz refresh rate. The smartphone packs up to 8GB of RAM and includes a 5,000mAh battery that offers 18W fast charging support.
On this page, we will guide you on installing the official stock Firmware flash file on your Tecno Spark 10C KI5m. Well, the device is powered by the Spreadtrum Unisoc processor. This guide will be helpful to unbrick or fix any software issues on your device.
To install the firmware flash file on Tecno Spark 10C KI5m, you need to download the SPD Flash tool (also known as the Spreadtrum Flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make flash the firmware file easier.
Page Contents
Tecno Spark 10C Specification:
Tecno Spark 10C brings you a premium experience with its elegant design and smooth performance. The smartphone runs on Android 12 with HiOS 8.6 and features a 6.6-inch HD+ display with a 90Hz refresh rate for seamless visuals. For gaming and multitasking, the device is equipped with a powerful octa-core SoC, backed by up to 8GB of RAM with Memory Fusion technology that expands the RAM up to 16GB using unused internal storage.
On the imaging front, the Tecno Spark 10C packs a dual-camera setup at the back, led by a 16MP main sensor, and a front-facing 8MP camera with dual flash to capture perfect selfies. For storing your precious memories, the device comes with ample internal storage of 128GB, which can be further expanded via a MicroSD card.
The Tecno Spark 10C is designed for your ultimate convenience with its connectivity features, including 4G, dual-band Wi-Fi, GPS, Bluetooth, and a USB Type-C port for quick charging. It also boasts sensors such as ambient light, e-compass, g-sensor, gyroscope, and a side-mounted fingerprint scanner.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Tecno Spark 10C Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Tecno Spark 10C
- You can fix the boot loop issue on Tecno Spark 10C
- Fix Unfortunately, the app has stopped errors on Tecno Spark 10C
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Tecno Spark 10C
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Tecno Spark 10C back to Factory State
How to Flash Tecno Spark 10C KI5m Firmware File
You should download the firmware flash file before installing the Stock ROM on your Tecno Spark 10C. Then download and install the USB Drivers and flash tool on the PC as well. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
- Supported device: Tecno Spark 10C KI5m
- Make sure to charge your device more than 50%
- It would be best if you had a PC or Laptop with a USB cable.
- Take a complete backup of your android phone
- Download Drivers and Tools: Spreadtrum drivers, SPD Flash Tool, and Infinix USB Drivers
Tecno Spark 10C KI5m Flash Files
| Software Details | Download Link |
| Flash File Name: KI5m-F065AiAo-S-GL-20230704V204 File Size: 1.4 GB |
Download Link |
Instructions to Install: via SPD Flash tool
Now, without wasting any more time, let’s jump into the firmware installation steps below:
That’s it, guys. We hope you’ve successfully installed the Stock Firmware on your Tecno Spark 10C device. Feel free to ask in the comments below for any queries.
what is the zip password?