Vivo Y21T PD2142F Firmware Flash File (Stock ROM)

Did you accidentally brick your Vivo Y21T PD2142F, or are you facing any boot loop, lag, or shatter? Then you are in the right place. We will guide you to install the latest Stock ROM flash file on Vivo Y21T. The guide is simple and easy.

This process is helpful if you have bricked your device, lag, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock. So without further wasting our time, let’s understand what a stock firmware flash file is.

Vivo Y21T PD2142F Firmware Flash File

Vivo Y21T Device Overview:

The Vivo Y21t features a 6.51 inches IPS panel with a 60 Hz refresh rate. It is an HD+ panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. Under the hood, we get the Qualcomm Snapdragon 680 processor built on a 6 nm manufacturing process. It is an octa-core processor with four Kryo 265 Gold cores clocked at 2.4 GHz and four Kryo 265 Silver cores clocked at 1.9 GHz. For handling the graphics-intensive tasks, we have the Adreno 610. The smartphone comes with Android 11 out of the box with Funtouch 12 skin running on top.

In terms of optics, we get a triple rear camera setup and a single selfie camera at the front. The rear camera setup consists of a 50 MP primary sensor paired with an f/1.8 lens, a 2 MP depth sensor paired with an f/2.4 lens, and a 2 MP macro sensor paired with an f/2.4 lens. The selfie camera at the front is an 8 MP wide sensor paired with an f/1.8 lens. Both the rear and front camera setups are limited to 1080p video recording at 30 fps.

Advertisements

The smartphone comes in two single storage options: 128GB internal storage + 4GB RAM and 128GB internal storage + 6GB RAM. We do get a dedicated microSD slot for storage expansion. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, FM Radio and Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, light sensor, proximity sensor, accelerometer, and compass. Powering it all is a 5000 mAh battery that supports 18W quick charge. The smartphone has two color options: Midnight Blue and Pearl White.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Vivo Y21T Stock ROM flash file on your computer.

  • If your device is dead, you can unbrick using the Stock ROM file
  • You can fix or repair the IMEI on your device using DB files from Stock ROM
  • Remove any malware or Adwares from Vivo Y21T
  • You can fix the boot loop issue on Vivo Y21T
  • Fix Unfortunately, the app has stopped errors on Vivo Y21T
  • Fix Network related issue
  • Patch Boot image to Root using Magisk
  • You can unroot Vivo Y21T
  • To Reset or Remove FRP on your device
  • Restore Vivo Y21T back to Factory State

Firmware Details:

  • Device Name: Vivo Y21T PD2142F
  • ROM Type: Stock ROM
  • Gapps File: Included
  • Tool Supported: QFil Flash tool
  • Processor: Qualcomm Snapdragon 680 Processor
  • Android Version: Android 11 with FuntouchOS 12

How to Install Vivo Y21T PD2142F Flash File

Before installing the Stock ROM on your Vivo Y21T, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

Download Flash Files

Firmware Detail Download Link
Flash File Name: PD2142F_EX_A_12.0.9.4.W30.V000L1
File Size: 4.0 GB
File Type: OTA
Android Version: Android 12
Download
Flash File Name: PD2142F_EX_A_11.0.7.43
File Size: 3.3 GB
File Type: OTA
Android Version: Android 11
Download
Flash File Name: PD2142F_EX_A_11.0.7.8
File Size: 3.3 GB
File Type: OTA
Android Version: Android 11
Download

Method 1: Instructions to Install via Recovery:

First, you can try the official method to install the OTA stock ROM update via Vivo device recovery. Follow the guide link given below to install the OTA update on the Vivo device.

Advertisements

Guide to Install Vivo Firmware on any Vivo smartphone

Method 2: Instructions to Install via QFIL Tool:

Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool.

Guide to Install Stock ROM using QFIL Tool

Advertisements

Method 3: Instructions to Install via MSM Download tool:

  1. Download the MSM Download tool, firmware, and drivers on your PC.
  2. Now install the USB drivers.
  3. Place the MSM download tool and firmware in the same folder
  4. Open the MSM download tool and connect your device to PC/Laptop
  5. Once you connect, it will automatically load the firmware; if not, select it manually.
  6. Click on the start button and wait patiently to complete the installation process.
  7. Once it is done! remove your device from your PC. That’s it!

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Vivo Y21T device successfully. Feel free to ask in the comments below for any queries.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.