Xiaomi Black Shark 3 Pro Firmware Flash File [Back To Stock ROM]

Xiaomi Black Shark 3 and 3 Pro is announced to be launched in March 2020 and runs on Android 10.0. Do you have Xiaomi Black Shark 3 Pro in your hands and want to flash Stock ROM? Well here is the stock firmware collection for Xiaomi Black Shark 3 Pro (Klein) users for every region. In this article, we will share the complete list of the Xiaomi Black Shark 3 Pro Stock ROM flash file and follow the guide to install the firmware using the Mi Flash tool.

Since Android is a highly customizable software and there is always a possibility that you may end up in a situation of lagging, boot loops, or soft brick. Then, this guide will be helpful. It is always good to keep the Xiaomi Black Shark 3 Pro stock firmware with you in case something went wrong.

Xiaomi Black Shark 3 Pro (Klein) Stock Firmware

Xiaomi runs MIUI on all its devices which is fairly simple yet filled with features. This is why a lot of people like Xiaomi devices. However, there are times when the firmware of Xiaomi devices crashes, lags, and create problems. This can be solved by installing the stock firmware again on the device.

Stock firmware is the factory firmware that comes pre-installed on the device. Installing Stock firmware on your Xiaomi Black Shark 3 Pro will get rid of any software problem you might have in your device. So here is Xiaomi Black Shark 3 Pro stock firmware collection which you can download and flash in your device. Today in this guide will help you to install stock firmware in Xiaomi Black Shark 3 Pro. It is always good to keep Xiaomi Black Shark 3 Pro stock firmware with you in case something went wrong.

If you’re also facing problems in your device like screen freezing, unresponsive, camera fail, boot loops, slow performance etc. Then you can install stock firmware to fix these problems. Check the other advantage of Stock Firmware given below.

The Advantage of Stock Firmware

• Flash Stock To Unbrick your Xiaomi Black Shark 3 Pro
• Flash Stock ROM to Fix the boot loop problem
• Upgrade and Downgrade Xiaomi Black Shark 3 Pro
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Xiaomi Black Shark 3 Pro
• By flashing Stock ROM, you can solve software problems.
• Revert back to stock to gain your warranty.

List of Xiaomi Black Shark 3 Pro (Klein) Flash Files:

How to install Stock Firmware on Xiaomi Black Shark 3 Pro

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

• This ROM is supported only for Xiaomi Black Shark 3 Pro.
• You should have a working Windows PC/Laptop
• Download and Install the latest Xiaomi USB Driver for Windows and MAC. [For All Android USB Drivers]
• Download and Install the Xiaomi Mi Flash tool on your PC (Fastboot Method)
• Charge your phone to at least 50% before upgrading your phone.
• Take a complete backup of your phone data [Follow any method]
  • How to Backup Your Android Phone Without ROOT
  • How to Backup Complete Stock or Custom ROM using TWRP recovery
  • Backup Your Android Apps and Data with Titanium Backup
  • How to Backup Your Android Phone Directly to PC with TWRP!!
  • How to Backup Your Data on Android device
  • If you already have TWRP: then you can Create and Restore Nandroid Backup via TWRP

Instructions to Install on Xiaomi Black Shark 3 Pro:

I hope you installed the Stock ROM on Xiaomi Black Shark 3 Pro (Klein) successfully, Now please rate this website with your comment. We always welcome feedback and improvements.

Black Shark 3 Pro Specifications

The Black Shark 3 Pro sports a 7.1 inch Full HD+ AMOLED display without any notches. It has a pixel density of 484 PPI, a screen refresh rate of 90Hz, a touch sensing rate of 270Hz, 500 nits of brightness, 19:5:9 aspect ratio, and it also has HDR 10+ compatible display. This display also has an optical in-display fingerprint scanner and is unknown by which Corning it is protected. Except for the front, i.e., the frame and rear of the device are made up of aluminum. Underneath this new gaming phone, it sports the same Qualcomm Snapdragon 865 that we have seen on some flagships that have been unveiled from February 2020.

As you know, this SoC is built on the 7nm process and has an octa-core setup consisting of the Kryo 585 cores that have been clocked at different speeds. And to the GPU side, it has the latest Adreno 650 GPU. Coming to the memory side, it is available in two RAM variants i.e., in the 8GB and 12GB RAM variants. Further, it is available in the 128GB and 256GB Internal storage variant, which is on the UFS 3.0 tech.

Talking about the optics, the Black Shark 3 Pro has a triple rear camera setup. However, this is a gaming phone and not a camera-centric one. This triple rear camera setup includes a primary 64MP sensor with an f/1.8 aperture value, and with PDAF. This sensor gets assisted by a 13MP ultra wide-angle sensor with an f/2.3 aperture value. And finally, it gets a tertiary 5MP depth sensor with an f/2.2 aperture value. To the front, the device has a 20MP sensor with an f/2.2 aperture value. The rear camera can shoot video in 4K resolution, while the front can shoot only up to 1080p that too in 30 fps.

Talking about the optics, the Black Shark 3 Pro has a triple rear camera setup. However, this is a gaming phone and not a camera-centric one. This triple rear camera setup includes a primary 64MP sensor with an f/1.8 aperture value, and with PDAF. This sensor gets assisted by a 13MP ultra wide-angle sensor with an f/2.3 aperture value. And finally, it gets a tertiary 5MP depth sensor with an f/2.2 aperture value. To the front, the device has a 20MP sensor with an f/2.2 aperture value. The rear camera can shoot video in 4K resolution, while the front can shoot only up to 1080p that too in 30 fps.