On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Xiaomi Poco F2 Pro (Redmi K30 Pro), codenamed “lmi.” If you want to install the pure version of Android 14, you’re in the right place.
Poco F2 Pro is one of Xiaomi’s flagship devices that was launched in May 2020. It runs on MIUI 11 based on Android 10 out-of-the-box. It packs a Snapdragon 865 SoC, a 6.67-inches Super AMOLED display, a pop-up selfie camera, up to 8GB/256GB storage, 64MP quad rear cameras, an in-display fingerprint sensor, 4700mAh battery with 30W quick charging, and more.
Page Contents
Xiaomi Poco F2 Pro Overview
The POCO F2 Pro looks identical to Redmi K30 Pro, and the is almost similar in terms of hardware as well. The POCO F2 Pro has the Qualcomm’s latest 5G processor Snapdragon 865 coupled with highspeed LPDDR5 RAM of 6 to 8 GB, and the top-end 256 GB variant comes with ultrafast UFS 3.1 storage option. It has a powerful Adreno 650 GPU alongside a new liquid cooling 2.0. On top of that, the phone also features a 3.5mm headphone jack as well.
The phone has an aluminum frame with a glass body at the back, which is protected by Corning Gorilla Glass 5. POCO F2 Pro has 6.67 inches of 1080p super AMOLED screen, which also happens to have HDR10+ certification. The screen has an aspect ratio of 20:9 and comes with a pixel density of 395 Pixels per inches (PPI). It has an in-display optical fingerprint scanner. The front camera is a pop-up mechanism so, there’s no distraction on the screen, and the screen-to-body ratio is around 87%. The screen is also protected by Corning Gorilla Glass 5.
The POCO F2 Pro runs Android 10 on top of MIUI 11 out of the box. It has its own POCO launcher as well. The phone has a dual sim option as well. The battery is around 4700 mAh, which can be fully charged from 0-100% in about 63 minutes from the proprietary 30w charger that comes within the box. It weighs around 219 grams. The phone is IP53 splash-resistant, meaning you cannot dunk in the water in any way.
As far as the camera is concerned the POCO F2 Pro features a quad camera setup consisting of a 64 MP main camera, then 5 MP telephoto Macro lens, which is followed by a 13 MP ultrawide lens with a 123° field of view and at the end there’s a 2 MP depth sensor. It has a DUAL-LED dual-tone flash along with HDR support. The phone can record 8K video at 24 or 30 fps and 4K at 60 fps along with 1080 at 30/60/120/240fps. The phone also has a slo-mo video recording option, which records at 1080p@960fps. POCO F2 Pro features a gyro-based EIS for the stabilization of videos. On the front, POCO F2 Pro sports a massive 20MP pop-up camera. The front camera also sports 120fps slow-motion video recording capability.
The phone has WIFI 6 dual-band and Bluetooth 5.1. It also packs a dual-band A-GPS and NFC for payments using Google Pay. POCO F2 Pro has all the necessary required sensors like proximity, gyro, compass. The phone has been launched for 499€ and comes in Neon Blue, Phantom White, Electric Purple, and Cyber Gray color options.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? * Hotspot may lag out when trying to turn it off
How To Install AOSP Android 14 on Poco F2 Pro (lmi)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Poco F2 Pro (lmi) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Poco F2 Pro.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Xiaomi USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Xiaomi USB drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Poco F2 Pro’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Poco F2 Pro.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Poco F2 Pro (lmi) here.
| Project Elixir | XDA Development Page |
| CrDroid OS | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Poco F2 Pro is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Poco F2 Pro comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Poco F2 Pro, flashing the ported Android 14 is an option. Although it seems like the Poco F2 Pro won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.