Download Latest Huawei P40 USB Drivers and ADB Fastboot Tool

The base variant in the new Huawei P40 series is the Huawei P40. It comes with fewer features compared to its siblings, like 6.1″ display, triple rear cameras, 3800mah battery, 6/8GB RAM, 128/256GB storage. If you have bought this device and want to connect it to PC, which is obvious, then this post simply enables you to download the latest Huawei P40 USB Drivers for Windows 7, 8, and 10 very simple.

It is very necessary to have USB drivers whenever you have to connect Huawei P40 to the Pc for the purpose of transferring data or important files. Also, when it comes to updating your Huawei P40 manually, it’s necessary to have them on your PC. While you are installing or flashing Fastboot firmware on the device, then Huawei P40 USB Drivers are required. Check out the download links given in this post to simply keep up the pace in this matter.

Huawei P40

Huawei P40 Specifications: Overview

The Huawei P40 has a 6.1 inches OLED display with a dual a Full HD+ resolution and a dual punch hole to the left. It has a screen to body ratio of 86.3 percent, an aspect ratio of 19:5:9, a pixel density of 422 Pixel Per Inch (PPI), and a resolution of 1080 x 2340 pixels.

Coming to the internals of the Huawei P40, it sports the Kirin 990 5G SoC, which is built on the 7nm process. This setup includes two Cortex A76 cores that clocks at 2.86GHz, another two Cortex A76 cores which clocks at 2.36GHz, and finally four Cortex A55 cores that clock at 1.95GHz. To the GPU side, it sports the Mali G76 MP16 GPU. Talking about the memory side, it comes with 6, and 8GB of RAM. Further, it comes with 128, and 25GB of UFS 3.0 internal storage. Further, this internal storage is also expandable via the nano memory card up to 256GB. The smartphone runs on EMUI 10.1, which is based on Android 10 (AOSP + HMS).

Coming to the optics, the Huawei P40 sports a triple rear camera setup arranged vertically in a rectangle, i.e., like its siblings. This setup includes a primary 50MP with f/1.9 aperture, OIS, and omnidirectional PDAF. It pairs with an 8MP telephoto sensor with f/2.4 aperture, OIS, 3x optical zoom, and PDAF. Further, it gets a 16MP ultra wide-angle sensor with f/2.2 aperture and autofocus. It gets Leica optics, LED flash, and support for HDR photos. To the front, it gets a 32MP sensor with f/2.2 aperture and PDAF. It also gets an IR TOF 3D (biometric sensor). Just like its siblings, both the front and rear can shoot videos in 4K resolution.

The Huawei P40 packs a smaller 3,800 mAh battery and gets support for 22.5 fast wired charging tech. However, it doesn’t get support for wireless and wireless reverse charging.

Connectivity options include Wi-Fi 802.11 a/b/g/n/ac/ax, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.1, A2DP, LE, GPS with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS, NavIC, NFC, Infrared port, and USB 3.1, Type-C 1.0 reversible connector. Sensors onboard include Infrared face recognition, fingerprint (under display, optical), accelerometer, gyro, proximity, compass, and color spectrum. This smartphone gets protection for IP53 dust and splash protection.

Huawei P40 USB drivers

The USB driver makes almost every task that needs to be performed by connecting the device to PC easier. All the files can be transferred in no time without worrying about anything. Also, there are certain benefits to having it. Before you proceed to download, it is suggested to you to remove the previously installed Huawei P40 from your PC in case you have installed it. Once you are done, click the below link to download USB Drivers on your PC.

Download Latest USB Drivers

You must disconnect your device from the PC first. Next, download this .zip file and extract it. You may need to install an app from the Play Store to extract this file. You can proceed with any which are available in the Play store for this purpose. Once download double tap on the file and follow the instructions on the screen.

How to Install Huawei P40 Latest USB Drivers

You can download and install Huawei P40 USB Drivers on your PC without any issues. If you face any problem, then make sure to reach us via comment or mail. We will get in touch with you. Here is the complete guide to manually install Android USB drivers on your PC.

Huawei P40 ADB Fastboot Tool:

If you have bought this device and want to try some other custom ROM or recovery. Then you may need this ADB Fastboot driver on your PC. Though you have to Unlock Bootloader first, then this tool is really important. Download the ADB and Fastboot tool and Install it on your PC.

Download ADB and Fastboot tool

What is ADB?

ADB or Android Debug Bridge is a small debug tool that you will find in the Android Software Development Kit (SDK). It is basically a command-line tool that does the communication between your Android device and a computer. With ADB, your device can be controlled from the computer via USB, files can also be transferred, and it runs powerful shell commands. ADB can be used to send terminal commands to an Android device for changing the system level.

What is Fastboot:

Like ADB, Fastboot is also a part of SDK. The Fastboot tool could be helpful for reflashing partition and image files on your device. In a fastboot, system, the file system images can be modified from a computer over a USB connection. Like recovery, updates and zip files can also be installed from fastboot.

Instructions to Install:

You can install the ADB driver on both windows and mac. You can follow the below instructions to install ADB on both Windows and PC.

For Windows //// For Mac 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.