Advertisements

How To Root Itel Vision 1 Using Magisk [No TWRP needed]

The Itel Vision 1 (Model: L6005) was launched with mid-range budget specifications and the device runs on Android 9.0 Pie. The device launched in February 2020 with a 6.09-inch display, 1.6GHz octa-core Unisoc SC9863A processor, and 2GB of RAM.  If you’re using this device and want to enable root access via Magisk, then this guide is for you. Here we have shared the required downloads, pre-requirements, and an Easy Method To Root Itel Vision 1 Using Magisk without TWRP Recovery.

As Android users, most of us want to heavily customize our Android devices. Rooting an Android device opens the unlimited possibilities of customizations that include installing rooted apps, hibernate background running tasks, improve battery life, lock screen or status bar changes, etc. It also offers uninstalling system apps, edit/delete system root files, installing custom modules, and more. All of these things can’t be possible without rooting.

How To Root Itel Vision 1 Using Magisk [No TWRP needed]

What is Magisk?

There are two most popular and widely used rooting methods available such as SuperSU and Magisk. Both the SuperSU and Magisk offer root access but nowadays, most of the developers and users prefer Magisk. Magisk is a system-less root that enables root access over the system components without affecting the system core files.

Therefore, Magisk alters and stores the temporary files in the device boot partition. This is a quite safe method and effective as well. It doesn’t hamper Google’s SafetyNet security feature and other banking apps also work fine with Magisk. Magisk comes with a Magisk Manager app that offers rooted device status, downloading & installing custom modules on your device, and more.

Please Note:

  • Your device warranty may void after rooting.
  • Rooting will block the software OTA updates.

Now, let’s take a look at the requirements, downloads, and steps to Root Itel Vision 1 using Magisk.

Pre-Requirements:

  • The Stock ROM and Boot Image File are only for the Itel Vision 1 model.
  • Make sure to take a complete backup of your device data at first.
  • Charge your device battery more than 60% at least.
  • You will require a PC/Laptop and a USB cable.
  • Download all the required files from below.

Required Downloads:

Disclaimer:

Rooting a device will void the device(s) warranty. We’re at GetDroidTips will not be responsible for any kind of issue or error that occurs on your device during or after flashing any file or following this guide. Make sure what you’re doing. Any improper step or method can brick your device or the device may be stuck in bootloop. We will recommend you to take a full backup at first then proceed at your own risk.

Let’s head over to the rooting steps one-by-one.

1. Steps to Extract and Patch Boot Image using Magisk

  • You have to download and extract the ROM to your PC.
  • Here is the guide on how to obtain the boot.img using Spreadtrum tool
  • Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
  • Open the Magisk Manager app on your device. When a popup appears asking to install Magisk, select Install and choose to install again.
  • Tap on the “Patch Boot Image File”.
    Install patched boot image TWRP
  • Go to internal storage and select your phone’s boot image that you transferred earlier.
  • Wait for a couple of seconds. Magisk will start patching the boot image.
  • Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.

Now, you need to follow the second step to flash the patched boot image file.

2. Steps To Install the Patched Boot Image on Itel Vision 1

Follow the given link to install Patched Boot Image on Itel Vision 1:

Guide to Install the Patched Boot Image on Spreadtrum Device

Root Itel Vision 1 via ADB Fastboot

In some cases, if the above method to Root Itel Vision 1 doesn’t work, then try via ADB fastboot method.

  • After extracting the ADB Fastboot tool, you must move the patched boot image to the same folder. Hold the Shift key and click on the right mouse button to open the command window/PowerShell.
  • Run the following command in the open command prompt.
    • Flash the “patched_boot.img” to install Magisk and root your Android device:
fastboot flash boot patched_boot.img
    • For devices with A/B partition system, use the following commands: fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img

Kindly replace [patched_boot.img] with the name of the boot image file you downloaded followed by the .img extension.

  • The flashing process will begin. Once done, run
fastboot reboot
  • You’re done.

Steps to Verify the Systemless Root

  1. Download and install the Magisk Manager APK, and launch it.
  2. To verify that you have a systemless root, check the top of the screen and if you see all options with Green Tick that means you’ve successfully rooted and bypassed the SafetyNet feature.Magisk Status Check

We hope this guide is helpful to you and you’ve easily rooted your Itel Vision 1 device via Magisk. For any queries, you can ask in the comments below.

Advertisements

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.