Tecno L9 Plus Firmware Flash File (Stock ROM | 7.0)

Pre-Requirements:

• Supported device: Tecno L9 Plus
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Tecno USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Make sure you follow and download all the required files and flash tools on your PC.
2. Open the flash tool exe file to open the SP Flash Tool User Interface
3. Once your load the SP Flash tool UI, Tap on the Download option
   
4. In the download tab, you have to load both the download agent and the scatter text file in the scatter-loading section.
   
5. You will find the scatter text file inside the ROM package for most cases, if not, you can create a scatter text file on your own.
6. Once you load the file, click the Download button
7. To start the upgrade process of stock ROM on your Tecno L9 Plus, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
8. When the phone connects, your device will start upgrading the stock firmware
9. You need to wait for a few minutes to complete the upgrade process.
10. Once the flashing process completes, you will find a green button which means a successful upgrade.
11. That’s it! You can reboot your Tecno L9 Plus

Follow our full-depth video guide.

So that’s it guys, this was our take on how to flash the firmware file on your Tecno L9 Plus.

We hope that you found this post useful. Let us know what do you guys think about it in the comments section down below.