How to Install Stock ROM on Moto G8 Plus XT2019-2 (Firmware Guide)

In this tutorial, we will guide you on how to install the stock ROM flash file on Motorola Moto G8 Plus XT2019-2 (doha). The device came out of the box with Android 9.0 Pie and was powered by Qualcomm Snapdragon 665. If you are someone who is looking to fix your device’s common issues like boot loop, repair IMEI, or fix any software issue, then this guide is for you.

To install the firmware flash file on Motorola G8 Plus XT2019-2, you need to download the software called ADB and Fastboot tool. This method is simple and easy.

Also Read: Download and Install Moto G8 and G8 Plus Android 11 Update

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Motorola G8 Plus XT2019-2 (doha) Stock ROM flash file on your computer.

• If your device is dead, you can unbrick using the Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adwares from Motorola G8 Plus
• You can fix the boot loop issue on Motorola G8 Plus
• Fix Unfortunately, the app has stopped error on Motorola G8 Plus
• Fix Network related issue
• Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
• You can unroot Motorola G8 Plus
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore Motorola G8 Plus back to Factory State

Moto G8 Plus XT2019-2 Firmware Flash Files:

Steps to Install Motorola XT2019-2 Firmware Flash File

If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Moto G8 Plus XT2019-2. Make sure to follow the steps carefully.

Pre-Requirements:

• This ROM is supported for the Moto G8 Plus XT2019-2 (doha) variant only.
• Make sure that your device should be charged at least 50% or higher.
• You will require a PC or Laptop with a USB Data Cable.
• We always recommend our readers take a full data backup of the device for safety purposes.
• Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
• To flash, you must download the ADB and Fastboot tool

Firmware Installation Guide:

Check out the firmware flashing guide below for the Moto G8 Plus XT2019-2. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Moto G8 Plus into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

1. The next step is to open the command window and go to the adb folder
2. Enter the following command to flash the firmware.

   fastboot flash partition gpt.bin 
   fastboot flash bootloader bootloader.img 
   fastboot flash vbmeta vbmeta.img 
   fastboot flash modem NON-HLOS.bin 
   fastboot flash fsg fsg.mbn 
   fastboot erase modemst1 
   fastboot erase modemst2 
   fastboot flash bluetooth BTFM.bin 
   fastboot flash dsp dspso.bin
   fastboot flash logo logo.bin 
   fastboot flash boot boot.img 
   fastboot flash dtbo dtbo.img
   fastboot flash system system.img_sparsechunk.0 
   fastboot flash system system.img_sparsechunk.1 
   fastboot flash system system.img_sparsechunk.2 
   fastboot flash system system.img_sparsechunk.3 
   fastboot flash system system.img_sparsechunk.4 
   fastboot flash system system.img_sparsechunk.5
   fastboot flash system_b system_b.img_sparsechunk.0 
   fastboot flash system_b system_b.img_sparsechunk.1
   fastboot flash vendor vendor.img_sparsechunk.0 
   fastboot flash vendor vendor.img_sparsechunk.1
   fastboot flash oem oem.img
   fastboot flash oem_b oem_other.img 
   fastboot erase carrier 
   fastboot erase userdata 
   fastboot erase ddr 
   fastboot oem fb_mode_clear 
   fastboot reboot

3. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.