Tecno Spark 30C (KL5, KL5N) Firmware Flash File

The TECNO SPARK 30C is an entry-level smartphone running Android 14, equipped with a MediaTek Helio G81 CPU and Mali-G52 GPU. It comes in two configurations: 4GB or 8GB RAM, with internal storage options of 128GB or 256GB. For camera enthusiasts, it features a 50MP rear camera and an 8MP front camera. The phone supports dual SIM and is powered by a 5000mAh battery with 18W wired charging.

This guide provides instructions for installing the firmware flash file on the TECNO SPARK 30C to fix common issues like boot loops, pattern lock, FRP lock bypass, and more. To install the firmware, you will need the SP Flash Tool or Smartphone Flash Tool, with detailed steps and video tutorials provided.

Tecno Spark 30C Specification:

The TECNO SPARK 30C is an entry-level smartphone running Android 14, powered by the MediaTek Helio G81 chipset and Mali-G52 GPU. It comes with options for 4GB or 8GB RAM, and storage choices of 128GB or 256GB. The device features a 6.67-inch IPS LCD display with a 720 x 1600 resolution. Camera-wise, it sports a 50MP rear camera and an 8MP front-facing camera for selfies. It supports dual SIM functionality and is equipped with a 5000mAh battery with 18W wired charging. Additionally, it includes a fingerprint sensor and accelerometer.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Tecno Spark 30C Stock ROM flash file on your computer.

• Unbrick Your Device: Use the Stock ROM file to revive your dead Tecno Spark 30C.
• Repair IMEI: Fix or repair the IMEI on your device using DB files from the Stock ROM.
• Remove Malware/Adware: Eliminate any malware or adware from your Tecno Spark 30C.
• Resolve Boot Loop Issues: Select and fix boot loop problems on your Tecno Spark 30C.
• Fix App Errors: Address “Unfortunately, the app has stopped” errors on your device.
• Network Issues: Fix network-related problems on your Tecno Spark 30C.
• Patch Boot Image for Root: Use Magisk for rooting with the Mediatek or Spreadtrum Guide.
• Unroot Your Device: Remove root access from your Tecno Spark 30C.
• Reset or Remove FRP: Follow the Mediatek or Spreadtrum FRP Guide to reset or remove FRP on your device.
• Restore Factory State: Return your Tecno Spark 30C to its original factory state.
• Bypass Pattern Lock: Unlock your device by bypassing the pattern lock.

How to Flash Tecno Spark 30C (KL5) Firmware File

You should download the firmware flash file before installing the Stock ROM on your Tecno Spark 30C. Then, download and install the USB Drivers and flash tool on the PC. Once you finish these, you can proceed to the steps below. But let’s take a quick look at the importance of stock firmware and the firmware details below.

Pre-Requirements:

• Supported device: Tecno Spark 30C (KL5)
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup of your Android phone
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Tecno USB Drivers

Tecno Spark 30C (KL5) Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Ensure you follow and download all the required files and flash tools on your PC.
2. Open the Flash tool exe file to open the SP Flash Tool User Interface
3. Tap the Download option and load both the download agent and the scatter text file in the scatter-loading section.
4. Once you load the file, click the Download button.
5. To start the upgrade process of the stock ROM on your Tecno Spark 30C, you need to turn off your device, hold the Volume Down and Volume Up keys together, and Connect your Phone to your PC/Laptop using a USB Cable. (Keep the Volume Down and Volume Up buttons until your computer detects the phone.)
6. When the phone connects, your device will start upgrading the stock firmware.
7. Wait for a few minutes; if you see a green button on your Flash tool, the upgrading process has been completed.
8. That’s it! You can reboot your Tecno Spark 30C.

Follow Complete Tutorial

Watch the YouTube Tutorial Guide

That’s it, guys. We hope you’ve installed the Stock Firmware on your Tecno Spark 30C (KL5) device. Feel free to ask any questions in the comments below.