On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Xiaomi Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i, codenamed “gauguin.” If you’re looking to install the pure version of Android 14, then you’re in the right place.
Xiaomi recently unveiled several Redmi series smartphones. Two of these budget-oriented devices are 5G compatible, while one of them still only supports 4G. Among the three devices, the most expensive and best of the lot is the Xiaomi Redmi Note 9 Pro 5G. Let’s take a look at what this device has in offer for us.
Page Contents
Xiaomi Redmi Note 9 Pro 5G Overview
The Redmi Note 9 Pro 5G features a 6.67 inches IPS LCD panel with a 120Hz refresh rate. It also supports HDR10, which is quite rare in the budget segment. In terms of resolution, we 1080 x 2400 pixels with a display that has a 20:9 aspect ratio. The front panel is also protected Gorilla Glass 5 exactly like the backside as this is a glass sandwich phone. Coming to the performance, we get the latest Qualcomm Snapdragon 750 5G, which is an octa-core processor with 2×2.2 GHz Kryo 570 cores and 6×1.8 GHz Kryo 570 cores. It comes with Adreno 619 for all the graphics intensive tasks.
Coming to the cameras, we get to the USP of this device, which is the primary camera on the rear side. It is a quad-camera setup at the back with a 108MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and finally, we have a 2MP depth sensor paired with an f/2.4 lens. Coming to the front, we get a 16MP selfie camera housed in the hole punch at the screen’s top. This 108 MP sensor is from Samsung, and on paper, this sensor is better than the one we had on the Samsung Galaxy S20 Ultra.
We get two RAM options with the phone: one 6GB variant and another 8GB variant. As for the storage, we get only 128 GB with the 6GB RAM model and 128GB or 256GB with the 8GB RAM model. There is support for even UFS 2.2, which is considered faster than the UFS 2.1 but definitely not in the same league as the UFS 3.0. We also get stereo speakers in this new Redmi Note 9 Pro 5G. In terms of connectivity, we get Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.1, A2DP, GPS, NFC, Infrared, and USB USB Type-C 2. Powering it all up is a 4,820 mAh battery, which can go from 0% charge to 100% in a rapid time. Officially they claim a full charge is possible in just under an hour. There are three color variants for the Redmi Note 9 Pro 5G: Gray, Blue, and Red/Mint.
Android 14 and Its Features
Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.
This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? * Hotspot may lag out when trying to turn it off
How To Install AOSP Android 14 on Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i (gauguin)
As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i (gauguin) model.
Before diving into the guide, please ensure you’ve met all the prerequisites listed below.
Pre-Requisites
Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i.
Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Xiaomi USB Drivers
To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.
It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Xiaomi USB drivers, you can find them here.
Unlock the Bootloader of Your Phone:
You need to unlock the Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i’s bootloader before installing custom ROMs.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i.
Download Android 14 ROM:
You will find all the Android 14 custom ROMs for your Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i (gauguin) here.
| Project Matrixx | XDA Development Page |
| PixelOS | XDA Development Page |
Download Android 14 Gapps:
Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions To Install:
- Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
adb reboot recovery
- Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
The installation of AOSP Android 14 on Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i comes to an end.
Conclusion
If you want to try out the latest Android OS version on your Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i, flashing the ported Android 14 is an option. Although it seems like the Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.