Xiaomi Poco X3 Pro (codenamed: vayu) launched in March 2021. The handset came with Android 11 and was later upgraded to Android 12. On this page, we will guide you to install the unofficial Android 13 Custom ROM on Poco X3 Pro. If you are someone who wants to install the vanilla version of Android 13, then this guide is for you.
The first-ever Poco smartphone was the Poco F1 which was an absolute steal for its price. The ISP of this device was the flagship Qualcomm chip inside. With a similar mindset, Poco is making a comeback with the Poco X3 Pro smartphone. This smartphone comes with the latest Qualcomm Snapdragon 860 chip, which is expected to offer performance close to the last generation’s flagship chip, the Qualcomm Snapdragon 865.
- Xiaomi Poco X3 Pro Overview
- Android 13 and Its Features
- What’s Working and Known Bugs:
- How to Install AOSP Android 13 on Poco X3 Pro (vayu)
Xiaomi Poco X3 Pro Overview
The Poco X3 Pro features a 6.67 inches IPS LCD panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It has a refresh rate of 120 Hz and has support for HDR10. The display is protected by Corning Gorilla Glass 6. Under the hood, we have the Qualcomm Snapdragon 860 built on a 7nm manufacturing process. It is an octa-core processor which consists of one Kryo 485 Gold core clocked at 2.96 GHz, three Kryo 485 Gold cores clocked at 2.42 GHz, and four Kryo 485 Silver cores clocked at 1.78 GHz.
In terms of optics, we have a quad-camera setup at the rear and a single camera at the front. The triple camera setup consists of a 48MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. Coming to the front, we get a 20MP sensor paired with an f/2.2 lens. The rear camera setup can capture 4K videos at 30 fps, while the front camera is only limited to 1080p video recording. For video recording, we only have EIS(Electronic Image Stabilization) and no OIS(Optical Image stabilization) on any of the sensors.
The smartphone will come with Android 11 out of the box with MIUI 12 for Poco running on top. We have three storage options for this device: 6GB RAM + 128GB internal storage, 8GB RAM + 128GB internal storage and 8GB RAM + 256GB internal storage. In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac/, Bluetooth 5.0, GPS, NFC, Infrared port, FM Radio, and USB Type-C 2.0.
Android 13 and Its Features
Google has finally started rolling their stable Android 13 update to the public. As expected, only Google has released the update to their Pixel lineup, but no OEM has started cooking a stable yet.
Regarding the Android 13, it seems that the Android 12’s successor has plenty of additional features and improvements to its predecessor. We’ve already seen and used the major UI and design element changes in Android 12 last year, known as ‘Material You.’ This materialistic theming design enhanced the Android user experience from the minimal subtle look, rounded corners, improved pop-ups, etc.
Whereas the improved scrolling screenshots, optimized one-handed UI mode, better privacy & security features, improved app notifications, per-app basis language preferences, app permissions to send notifications, BT LE Audio support, auto theme icons, updated now playing widget, etc. Users will also find intuitive QR scanner support, enhanced silent mode, tap-to-transfer media controls, multiple profiles for NFC payments, and more.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? You tell me
How to Install AOSP Android 13 on Poco X3 Pro (vayu)
As the title suggests, we’ve shared the requirements and steps to flash the AOSP Android 13 build on the Poco X3 Pro (vayu) variant.
Before heading over to the guide, make sure to follow all the requirements below.
Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Poco X3 Pro.
Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode), which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Xiaomi USB Drivers
A USB Driver is a set of files that allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.
It’s also worth mentioning that mobile devices and other external devices can use and run USB Drivers on a Windows computer. Such as a mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Xiaomi USB Drivers here.
Unlock Bootloader Your Phone:
You must first unlock the bootloader on your Poco X3 Pro to enjoy any custom ROM.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Poco X3 Pro.
Download Android 13 ROM:
Here, you will find all the Android 13 custom ROM for your Poco X3 Pro (vayu).
|Evolution X||XDA Development Page|
Download Android 13 Gapps:
It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 13 GApps by following our guide.
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions to Install:
- Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:
adb reboot recovery
- Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
- If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
Your device will now boot to the newly installed OS. With this, we conclude the guide on installing the AOSP Android 13 on Poco X3 Pro. Remember that the first boot might take time, and you might have to set up your device from scratch.
Flashing the ported Android 13 on your Poco X3 Pro will give you an early taste of the latest Android OS version. It looks like the Poco X3 Pro model won’t officially receive the Android 13 update from the manufacturer. So, it’s a good idea to get most of the features and visual treatment. However, if you find any extra bugs or stability issues, you should report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.