The Realme 6 Pro is a mid-range flagship featuring the powerful Snapdragon 720G chipset and a quad rear camera setup. It features a 6.6-inch LCD display. Realme 6 Pro (codenamed: RMX2061/RMX2063) launched in March 2020. The handset came with Android 10. On this page, we will guide you to install the unofficial Android 13 Custom ROM on Realme 6 Pro. If you are someone who wants to install the vanilla version of Android 13, then this guide is for you.
Page Contents
Realme 6 Pro Overview
The Realme 6 Pro features a 6.6 inch Full HD+ IPS LCD display with a resolution of 1080×2400 pixels. This display is an ultra Smooth display with a massive screen refresh rate of 90Hz, an aspect ratio of 20:9, a massive screen to body ratio of 90.6 percent. The device has a trendy punch-hole display.
Under the hood, it is powered by an octa-core Snapdragon 720G SoC which is built on the 8nm process. This SoC comes with Kryo 265 cores clocked at different speeds. It also comes with Adreno 618 GPU. Coming to the memory options, the device comes with 6GB and 8GB of LPDDR4X dual-channel RAM. Further, talking about the internal storage options is available in 64GB and 128GB of UFS 2.1 onboard storage options. This is also expandable via a micro SD card (up to 256GB). The device has a dedicated slot for this, where you guys can insert two Nano type SIM cards and a micro SD card slot at the same time.
Coming to the optics, the Realme 6 Pro sports a quad-camera setup arranged in the same manner as Realme X2, XT, and Realme 5 Pro. This quad rear camera setup consists of a 64MP Samsung GW1 primary sensor with an aperture value of f/1.8 aperture. This sensor pairs with a secondary 8MP ultra wide-angle sensor with an aperture value of f/2.3. Further, this camera setup includes a tertiary 12MP telephoto sensor with an aperture value of f/2.5 aperture and finally a regular 2MP macro shooter with an aperture value of f/2.4. To the front, there is a dual-hole selfie punch camera setup that houses the primary 16MP Sony IMX471 sensor with an aperture value of f/2.0. This sensor pairs with an 8MP secondary wide-angle sensor.
The Realme 6 Pro packs a 4,300 mAh battery which supports 30W Flash Charge support ( rebranded VOOC). The brand claims that it can be charged in 60 minutes from 0 – 100. The device runs on the latest Realme UI based on Android 10. The device will be available in two color options namely the Lightning Orange and Lightning Blue. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 5.1, A2DP, LE. GPS with dual-band A-GPS, GLONASS, BDS, NavIC. FM radio. USB 2.0, Type-C 1.0 reversible connector, USB On-The-Go.
Android 13 and Its Features
Google has finally started rolling their stable Android 13 update to the public. As expected, only Google has released the update to their Pixel lineup, but no OEM has started cooking a stable yet.
Regarding the Android 13, it seems that the Android 12’s successor has plenty of additional features and improvements to its predecessor. We’ve already seen and used the major UI and design element changes in Android 12 last year, known as ‘Material You.’ This materialistic theming design enhanced the Android user experience from the minimal subtle look, rounded corners, improved pop-ups, etc.
Whereas the improved scrolling screenshots, optimized one-handed UI mode, better privacy & security features, improved app notifications, per-app basis language preferences, app permissions to send notifications, BT LE Audio support, auto theme icons, updated now playing widget, etc. Users will also find intuitive QR scanner support, enhanced silent mode, tap-to-transfer media controls, multiple profiles for NFC payments, and more.
What’s Working and Known Bugs:
Whats working? Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration Known issues ? You tell me
How to Install AOSP Android 13 on Realme 6 Pro (RMX2061/RMX2063)
As the title suggests, we’ve shared the requirements and steps to flash the AOSP Android 13 build on the Realme 6 Pro (RMX2061/RMX2063) variant.
Before heading over to the guide, make sure to follow all the requirements below.
Pre-Requisites
Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.
Charge Your Phone
It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.
Download ADB and Fastboot Binaries
You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Realme 6 Pro.
Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode), which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.
Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).
Download Realme USB Drivers
A USB Driver is a set of files that allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.
It’s also worth mentioning that mobile devices and other external devices can use and run USB Drivers on a Windows computer. Such as a mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Realme USB Drivers here.
Unlock Bootloader Your Phone:
You must first unlock the bootloader on your Realme 6 Pro to enjoy any custom ROM.
Install TWRP Recovery:
You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Realme 6 Pro.
Download Android 13 ROM:
Here, you will find all the Android 13 custom ROM for your Realme 6 Pro (RMX2061/RMX2063).
| ProjectElixir | XDA Development Page |
Download Android 13 Gapps:
It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 13 GApps by following our guide.
Warning!
GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.
Instructions to Install:
- Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
- Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
- Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:
adb reboot recovery
- Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
TWRP Home - If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
- When that is done, you may reboot your device. Head over to Reboot and select System.
Your device will now boot to the newly installed OS. With this, we conclude the guide on installing the AOSP Android 13 on Realme 6 Pro. Remember that the first boot might take time, and you might have to set up your device from scratch.
Conclusion
Flashing the ported Android 13 on your Realme 6 Pro will give you an early taste of the latest Android OS version. It looks like the Realme 6 Pro model won’t officially receive the Android 13 update from the manufacturer. So, it’s a good idea to get most of the features and visual treatment. However, if you find any extra bugs or stability issues, you should report them to the respective forum.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.