Download and Install AOSP Android 13 on Xiaomi Mi Note 10 Lite

Xiaomi Mi Note 10 Lite (codenamed: toco) launched in April 2020. The smartphone came out of the box with Android 10 Q. On this page, we will guide you to install the unofficial Android 13 Custom ROM on Xiaomi Mi Note 10 Lite. If you are someone who wants to install the vanilla version of Android 13, then this guide is for you.

Xiaomi has recently unveiled its new smartphone i.e., the Mi Note 10 Lite (codenamed toco). This is the premium mid-range smartphone from the brand. It sports a 6.47-inch AMOLED display, Qualcomm Snapdragon 730G, 6 or 8GB of RAM, 64 or 128GB storage, 64MP quad rear camera setup, 16MP front camera, 5260mAh battery, and runs on Android 10.

Download and Install AOSP Android 13 on Xiaomi Mi Note 10 Lite

Xiaomi Mi Note 10 Lite Overview

The Xiaomi Mi Note 10 Lite features a 6.47 inches AMOLED display with a Full HD+ resolution and a waterdrop style notch. The display comes with an optical in-display fingerprint scanner, and an aspect ratio of 19:5:9, a screen to body ratio of 87.8 percent, HDR10, it can blow up to 430 nits, a pixel density of 398 Pixel Per Inch (PPI), and gets protected by Corning Gorilla Glass 5.

Underneath the device, it sports the popular Qualcomm Snapdragon 730G SoC that is built on the 8nm process. It has an octa-core setup and includes two Kryo 270 Gold cores that clocks at 2.2GHz, and six Kryo 270 silver cores that clock at 1.8GHz. To the GPU side, it sports the Adreno 618. Further, the chipset pairs with 6, and 8GB of RAM, and 64, and 128GB of UFS 2.1 storage. Like the premium devices, it can’t be expanded via a micro SD card slot. The device runs on MiUi 11 on top of Android 10.

Talking about the cameras, the Mi Note 10 Lite sports a quad rear camera setup that is housed in a vertical setup. The setup includes a primary 64MP sensor with an aperture value of f/1.9, PDAF, and Laser AF. It pairs with an 8MP ultra wide-angle sensor with an aperture value of f/2.2 and a 2MP macro sensor with an aperture value of f/2.4. Finally, it comes with another 5MP depth sensor with an aperture value of f/2.4. It supports Quad-LED flash and comes with all other features that a smartphone needs. To the front, it comes with a 16MP sensor with an aperture value of f/2.5.

The Mi Note 10 Lite packs a 5,260mAh battery with support for 30W fast charging tech. The phone comes in three color options like Midnight Black, Glacier White, and Nebula Purple. Sensors on board include proximity, light, accelerometer, gyro, and compass.

Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot, Bluetooth 5.0, A2DP, LE, aptX HD, aptX Adaptive, GPS with A-GPS, GLONASS, GALILEO, BDS, NFC, and USB 2.0, Type-C 1.0 reversible connector. Both the front and rear gets protected by the Corning Gorilla Glass 5. The phone also gets support for face unlocks other than the fingerprint scanner.

Android 13 and Its Features

Google has finally started rolling their stable Android 13 update to the public. As expected, only Google has released the update to their Pixel lineup, but no OEM has started cooking a stable yet.

Regarding the Android 13, it seems that the Android 12’s successor has plenty of additional features and improvements to its predecessor. We’ve already seen and used the major UI and design element changes in Android 12 last year, known as ‘Material You.’ This materialistic theming design enhanced the Android user experience from the minimal subtle look, rounded corners, improved pop-ups, etc.

Whereas the improved scrolling screenshots, optimized one-handed UI mode, better privacy & security features, improved app notifications, per-app basis language preferences, app permissions to send notifications, BT LE Audio support, auto theme icons, updated now playing widget, etc. Users will also find intuitive QR scanner support, enhanced silent mode, tap-to-transfer media controls, multiple profiles for NFC payments, and more.

What’s Working and Known Bugs:

Whats working?

Wi-Fi
RIL
Volte
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint
FM radio
Sound
vibration

Known issues ?
You tell me

How to Install AOSP Android 13 on Xiaomi Mi Note 10 Lite (toco)

As the title suggests, we’ve shared the requirements and steps to flash the AOSP Android 13 build on the Xiaomi Mi Note 10 Lite (toco) variant.

Before heading over to the guide, make sure to follow all the requirements below.

Pre-Requisites

Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Xiaomi Mi Note 10 Lite.

Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode), which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.

Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Xiaomi USB Drivers

A USB Driver is a set of files that allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.

It’s also worth mentioning that mobile devices and other external devices can use and run USB Drivers on a Windows computer. Such as a mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Xiaomi USB Drivers here.

Unlock Bootloader Your Phone:

You must first unlock the bootloader on your Xiaomi Mi Note 10 Lite to enjoy any custom ROM.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Xiaomi Mi Note 10 Lite.

Download Android 13 ROM:

Here, you will find all the Android 13 custom ROM for your Xiaomi Mi Note 10 Lite (toco).

DerpFest ROM XDA Development Page
Evolution X XDA Development Page
Project Elixir XDA Development Page

Download Android 13 Gapps:

It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 13 GApps by following our guide.

Warning!

GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions to Install:

  1. Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
  2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
    cmd platform-tools
  3. Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:
    adb reboot recovery
  4. Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.twrp-custom-romTWRP Home
  5. If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
  6. When that is done, you may reboot your device. Head over to Reboot and select System.
    reboot system twrp

Your device will now boot to the newly installed OS. With this, we conclude the guide on installing the AOSP Android 13 on Xiaomi Mi Note 10 Lite. Remember that the first boot might take time, and you might have to set up your device from scratch.

Conclusion

Flashing the ported Android 13 on your Xiaomi Mi Note 10 Lite will give you an early taste of the latest Android OS version. It looks like the Xiaomi Mi Note 10 Lite model won’t officially receive the Android 13 update from the manufacturer. So, it’s a good idea to get most of the features and visual treatment. However, if you find any extra bugs or stability issues, you should report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.