Download and Install AOSP Android 14 on Xiaomi Redmi K20 Pro / Mi 9T Pro

What’s Working and Known Bugs:

Whats working?

Wi-Fi
RIL
Volte
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint
FM radio
Sound
vibration

Known issues ?
You Tell Us

How To Install AOSP Android 14 on Redmi K20 Pro / Mi 9T Pro (raphael/raphaelin)

As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Redmi K20 Pro / Mi 9T Pro (raphael/raphaelin) model.

Before diving into the guide, please ensure you’ve met all the prerequisites listed below.

Pre-Requisites

Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Redmi K20 Pro / Mi 9T Pro.

Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.

Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Xiaomi USB Drivers

To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.

It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Xiaomi USB drivers, you can find them here.

Unlock the Bootloader of Your Phone:

You need to unlock the Redmi K20 Pro / Mi 9T Pro’s bootloader before installing custom ROMs.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Redmi K20 Pro / Mi 9T Pro.

Download Android 14 ROM:

You will find all the Android 14 custom ROMs for your Redmi K20 Pro / Mi 9T Pro (raphael/raphaelin) here.

Download Android 14 Gapps:

Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.

Instructions To Install:

1. Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
   
3. Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:

   adb reboot recovery

4. Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
5. If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
6. When that is done, you may reboot your device. Head over to Reboot and select System.
   

The installation of AOSP Android 14 on Redmi K20 Pro / Mi 9T Pro is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Redmi K20 Pro / Mi 9T Pro comes to an end.

Conclusion

If you want to try out the latest Android OS version on your Redmi K20 Pro / Mi 9T Pro, flashing the ported Android 14 is an option. Although it seems like the Redmi K20 Pro / Mi 9T Pro won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.