Will Xiaomi Redmi K20 and K20 Pro Get Android 12 Update?

If you are wondering whether Redmi K20 and K20 Pro will get the official Android 12 update, then let’s find out. In this article, we will update you on all the Xiaomi Redmi K20 and K20 Pro Android 12 related news, information, and downloads and guide you to flash the firmware on your device.

Will Redmi K20 and K20 Pro Get Android 12 Update?

As we know, this device has already received 2 major OS updates, then we doubt the release of the Android 12 update for this device. According to Xiaomi’s update strategy, they roll only 2 major OS updates for their smartphones. Xiaomi Redmi K20 and K20 Pro came out of the box with Android 9.0 Pie, and there is no info on whether this device will receive the Android 12 update or not.

There is no info on when the company will start rolling the Android 12 update to any of their Xiaomi devices. We regret it because there is currently no such news coming out from the official’s side. But, it is confirmed that by the end of 2021 or the beginning of 2022, you’ll get the details on which devices will be getting Android 12.

Updated on October 8, 2021: Finally, the XDA developer has created a new custom ROM for Redmi K20 Pro based on Android 12. This ROM is stable enough to use as a daily driver on your device.

Download and Install AOSP Android 12 Update:

As the title suggests, here we’ve shared the requirements and steps to flash the AOSP Android 12 build on the Redmi K20 and K20 Pro variants.

Before heading over to the guide, make sure to follow all the requirements below.

Pre-Requisites

Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, it is advised to follow the steps mentioned in this post carefully to avoid permanent damage or brick your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of the charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Redmi K20 / Redmi K20 Pro.

Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode), which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.

Whereas Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Xiaomi USB Drivers

A USB Driver is a set of files that basically allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.

It’s also worth mentioning that not only mobile devices but also other external devices can use and run USB Drivers on a Windows computer. Such as mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Xiaomi USB Drivers here.

Unlock Bootloader Your Phone:

To enjoy any custom ROM, you must first unlock the bootloader on your Redmi K20 and K20 Pro.

Install TWRP Recovery:

You have to install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, you can follow our guide to install TWRP Recovery on your Redmi K20 and K20 Pro.

Download Android 12 ROM:

In here, you will find all the Android 12 custom ROM for your Redmi K20 and K20 Pro.

Awaken OS	XDA Development Page
ArrowOS 12.0	XDA Development Page
Iron-Project ROM 2.1	XDA Development Page
VoltageOS	XDA Development Page
AOSP Android 12	XDA Development Page

Download Android 12 Gapps:

It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 12 GApps by following our guide.

Instructions to Install:

1. Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
2. Then head to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
   
3. Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:

   adb reboot recovery

4. Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.
   

   

5. If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
6. When that is done, you may reboot your device. Head over to Reboot and select System.
   

Your device will now boot to the newly installed OS. With this, we conclude the guide on installing the AOSP Android 12 on Redmi K20 / Redmi K20 Pro. Remember that the first boot might take time, and you might have to set up your device from scratch.

Wrap Up!

Regrettably, we do not have any particular release date for Android 12 for the Redmi K20 and K20 Pro. But, you can bookmark this page as we will soon add an update tracker to this page along with respective links. You can head over here for complete information about the Android 12 updates for Xiaomi devices, including eligible devices and other information.

In the meantime, if you liked this content and want to read more content, for more such awesome coverage, you can head over to our check out our Windows Guides, Gaming Guides, Social Media Guides, iPhone, and Android Guides to read more. Make sure to subscribe to our YouTube Channel for awesome videos related to Android, iOS, and Gaming.