On this page, we will guide you on downloading and installing the official firmware file on Realme 13 Pro 5G RMX3990. This tutorial is easy to follow. Realme 13 Pro 5G is powered by a Qualcomm SM7435-AB Snapdragon 7s Gen 2 processor powered by Android 14 under Realme UI 5.0.
If you are facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. Using the firmware file lets you bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most software glitches by flashing the stock firmware.
Page Contents
Realme 13 Pro 5G Specification:
The Realme 13 Pro 5G, released on August 6, 2024, combines a premium design with impressive performance. It features a 6.7-inch AMOLED display with 1 billion colors, a 120Hz refresh rate, and an exceptional 2000 nits peak brightness, making it ideal for vivid visuals even under bright sunlight. The screen is protected by Corning Gorilla Glass 7i, and the device is IP65 dust and water-resistant, adding durability. Powered by the Snapdragon 7s Gen 2 chipset, it offers smooth multitasking with up to 12GB RAM and storage options up to 512GB. However, it lacks expandable memory.
The camera setup includes a 50 MP wide lens with OIS for sharp images and an 8 MP ultrawide lens for versatile shots. Video recording supports up to 4K at 30fps with gyro-EIS. For selfies, the 32 MP front camera delivers high-resolution photos and 1080p video recording. Audio is enhanced with stereo speakers and Hi-Res audio, though it does not feature a headphone jack.
Connectivity options include Wi-Fi 6, Bluetooth 5.2, and 360° NFC. The 5200 mAh battery supports 45W fast charging, achieving 50% charge in just 27 minutes. The Realme 13 Pro 5G stands out as a sleek, feature-rich smartphone designed for performance and convenience.
Advantages of Installing Stock ROM
Here are some of the advantages of installing firmware files on your Realme 13 Pro 5G RMX3990:
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Realme 13 Pro 5G
- You can fix the boot loop issue on Realme 13 Pro 5G
- Fix Unfortunately, the app has stopped errors on Realme 13 Pro 5G
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Realme 13 Pro 5G
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Realme 13 Pro 5G back to Factory State
Firmware Details
- Device Name: Realme 13 Pro 5G RMX3990
- Gapps File: Included
- Tool Supported: Qualcomm Flash Tool
- Processor: Qualcomm SM7435-AB Snapdragon 7s Gen 2
- Android OS: 14.0
Steps to Install Stock Firmware on Realme 13 Pro 5G RMX3990
Now, before we get straight to the Steps to Install Stock Firmware on Realme 13 Pro 5G RMX3990, let us take a look at some of the prerequisites.
Pre-Requirements:
- Supported device: Realme 13 Pro 5G RMX3990
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method given below
- Download Drivers and Tools: Qualcomm drivers, QPST Flash Tool, and Realme USB Drivers
Realme 13 Pro 5G RMX3990 Flash Files
| Software Update | Download Link |
| File Name: Realme_13_Pro_5G_RMX3990_EX_11_14.1.0.405EX01_240803_QFIL
File Size: 7.76 GB Android: 14.0 |
Download |
Method 1: Instructions to Install via Recovery:
First, you can try the official method to install the OTA stock ROM update via Realme device recovery.
Method 2: Instructions to Install via QFIL Tool:
Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool
Guide to Install Stock ROM using QFIL Tool
Guide to Install Stock ROM using QPST Tool
Method 3: Instructions to Install via MSM Download tool:
- Download the MSM Download tool, firmware, and drivers on your PC.
- Now install the USB drivers.
- Place the MSM download tool and firmware in the same folder
- Open the MSM download tool and connect your device to a PC/Laptop
- Once you connect, it will automatically load the firmware; if not, select it manually.
- Click on the start button and wait patiently to complete the installation process.
- Once it is done! Remove your device from the PC. That’s it!
So that’s it, guys; this was our take on How to flash the firmware file on Realme 13 Pro 5G. We hope that you found this post useful. Let us know what you guys think about it in the comments below.