Realme P2 Pro 5G RMX3987 Firmware Flash File

On this page, we will guide you on downloading and installing the official firmware file on Realme P2 Pro 5G RMX3987. This tutorial is easy to follow. Realme P2 Pro 5G is powered by a Qualcomm SM7435-AB Snapdragon 7s Gen 2 processor powered by Android 14 under Realme UI 5.0.

If you are facing software issues such as WiFi or Bluetooth issues, lag, boot loop, or hard brick, you can fix the device by following this tutorial. Using the firmware file lets you bypass FRP lock, pattern lock, downgrade, or upgrade, and you can fix most software glitches by flashing the stock firmware.

Realme P2 Pro 5G Specification:

The Realme P2 Pro, released in September 2024, is a premium mid-range smartphone designed for performance and style. It features a 6.7-inch OLED display with 1 billion colors, a 120Hz refresh rate, and up to 2000 nits peak brightness, ensuring an immersive viewing experience.

The phone is powered by the Snapdragon 7s Gen 2 (4 nm) chipset, offering smooth performance with up to 12GB RAM and 512GB storage. With IP65 dust and water resistance, it is durable for everyday use, and the 5200 mAh battery supports 80W fast charging, delivering a full charge in just 49 minutes.

The dual-camera setup includes a 50 MP primary sensor with OIS for sharp, detailed shots and an 8 MP ultrawide lens for expansive photos. The 32 MP front camera supports 4K video recording, making it ideal for selfies and video calls. Additional features include stereo speakers, an under-display fingerprint sensor, Wi-Fi 6, and Bluetooth 5.2, ensuring connectivity and convenience in a sleek and lightweight design.

Advantages of Installing Stock ROM

Here are some of the advantages of installing firmware files on your Realme P2 Pro 5G RMX3987:

• If your device is dead, you can unbrick using the Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adwares from Realme P2 Pro 5G
• You can fix the boot loop issue on Realme P2 Pro 5G
• Fix Unfortunately, the app has stopped errors on Realme P2 Pro 5G
• Fix Network related issue
• Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
• You can unroot Realme P2 Pro 5G
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore Realme P2 Pro 5G back to Factory State

Firmware Details

• Device Name: Realme P2 Pro 5G RMX3987
• Gapps File: Included
• Tool Supported: Qualcomm Flash Tool
• Processor: Qualcomm SM7435-AB Snapdragon 7s Gen 2
• Android OS: 14.0

Steps to Install Stock Firmware on Realme P2 Pro 5G RMX3987

Now, before we get straight to the Steps to Install Stock Firmware on Realme P2 Pro 5G RMX3987, let us take a look at some of the prerequisites.

Pre-Requirements:

• Supported device: Realme P2 Pro 5G RMX3987
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup using any method given below
  • Full Data Backup without Root
  • Nandroid Backup via TWRP
• Download Drivers and Tools: Qualcomm drivers, QPST Flash Tool, and Realme USB Drivers

Realme P2 Pro 5G RMX3987 Flash Files

Method 1: Instructions to Install via Recovery:

First, you can try the official method to install the OTA stock ROM update via Realme device recovery.

Method 2: Instructions to Install via QFIL Tool:

Download the Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using the QFIL tool

Guide to Install Stock ROM using QFIL Tool

Guide to Install Stock ROM using QPST Tool

Method 3: Instructions to Install via MSM Download tool:

1. Download the MSM Download tool, firmware, and drivers on your PC.
2. Now install the USB drivers.
3. Place the MSM download tool and firmware in the same folder
4. Open the MSM download tool and connect your device to a PC/Laptop
5. Once you connect, it will automatically load the firmware; if not, select it manually.
6. Click on the start button and wait patiently to complete the installation process.
7. Once it is done! Remove your device from the PC. That’s it!

So that’s it, guys; this was our take on How to flash the firmware file on Realme P2 Pro 5G. We hope that you found this post useful. Let us know what you guys think about it in the comments below.