Tecno Boom J8 Firmware Flash File (Stock ROM)

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your Tecno Boom J8 then you can easily install the firmware flash file on it. Since Tecno Boom J8 is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your Tecno Boom J8 device. On this page, we will guide you on how to flash the firmware file on Tecno Boom J8 using the flash tool.

Most smartphone gets hard brick because of the carelessness of their users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with Tecno Boom J8 users. But don’t worry, as installing Stock ROM on Tecno Boom J8 is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick Tecno Boom J8 back to its previous working condition.Tecno Boom J8 Firmware Flash File

Tecno Boom J8 Firmware Flash File Guide

Remember this guide is also very much needed in case of upgrading or downgrading the firmware on Tecno Boom J8. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading Tecno Boom J8 using this guide.

As we said above – installing a firmware file on Tecno Boom J8 is no rocket science. The actual process of flashing Stock Firmware on Tecno Boom J8 is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on Tecno Boom J8 using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Advantage Of Tecno Boom J8 Stock Firmware:

  • Flash Stock To Unbrick your Tecno Boom J8
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade Tecno Boom J8
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on Tecno Boom J8
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide

Firmware Details:

  • Device Supported: Tecno Boom J8
  • Tool Supported: SP Flash Tool
  • Gapps Included
  • Processor: MediaTek
  • OS: Android 5.1

Steps to Install Stock Firmware on Tecno Boom J8

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites

Tecno Boom J8 Flash Files

Software Details Download Link
Flash File Name: Tecno_J8_MT6735_20160310.zip

Flash File Name: Tecno-J8-H354-C1-L-HiOS-20160310-MT6735.7z
File Size: 1 GB
OS: Android 5.1

Download
Flash File Name: Tecno-Boom-J8-H354-C1-L-HiOS-20160506.zip
File Size: 1.13 GB
OS: Android 5.1
Download
Flash File Name: Tecno-J8-H354-C1-L-HiOS-20160606.7z
File Size: 1.00 GB
OS: Android 5.1
Download
Flash File Name: Tecno J8-H354C1-L-161105V47.zip
File Size: 1.42 GB
OS: Android 5.1
Download
Flash File Name: Tecno J8-H354C1-L-161118V48.zip
File Size: 1.42 GB
OS: Android 5.1
Download
Flash File Name: Tecno J8-H354C1-L-161228V52.zip
File Size: 1.42 GB
OS: Android 5.1
Download

Instructions to Install

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your Tecno Boom J8, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool it means the upgrading process has been completed.
  8. That’s it! You can reboot your Tecno Boom J8

Follow Complete Tutorial

Watch Video Tutorial

I hope you installed the Stock Firmware on Tecno Boom J8 successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.