UMIDIGI Power 3 Firmware Flash File (Stock ROM)

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your UMIDIGI Power 3 then you can easily install the firmware flash file on it. Since UMIDIGI Power 3 is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your UMIDIGI Power 3 device. On this page, we will guide you on how to flash the firmware file on UMIDIGI Power 3 using the flash tool.

The most smartphone gets hard brick because of the carelessness of their users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with UMIDIGI Power 3 users. But don’t worry, as installing Stock ROM on UMIDIGI Power 3 is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick UMIDIGI Power 3 back to the previous working condition.

UMIDIGI Power 3 Firmware Flash File

UMIDIGI Power 3 Firmware Flash File Guide

Remember this guide is also very much needed in case of upgrading or downgrading the firmware on UMIDIGI Power 3. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading UMIDIGI Power 3 using this guide.

As we said above – installing a firmware file on UMIDIGI Power 3 is no rocket science. The actual process of flashing Stock Firmware on UMIDIGI Power 3 is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on UMIDIGI Power 3 using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Advantage Of UMIDIGI Power 3 Stock Firmware:

  • Flash Stock To Unbrick your UMIDIGI Power 3
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade UMIDIGI Power 3
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on UMIDIGI Power 3
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide

Firmware Details:

  • Device Supported: UMIDIGI Power 3
  • Tool Supported: SP Flash Tool
  • Gapps Included
  • Processor: MediaTek
  • OS: Android 10

Steps to Install Stock Firmware on UMIDIGI Power 3

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.


UMIDIGI Power 3 Flash Files

Software Details Download Link
Flash File Name: UMIDIGI_Power_3_V1.1_20200112.rar
OS: Android 10
Flash File Name: UMIDIGI_Power_3.E_V1.1_20200112.rar
OS: Android 10
Flash File Name: UMIDIGI_Power_3_V1.1_20200116.rar
OS: Android 10
Flash File Name: UMIDIGI_Power_3.E_V1.1_20200116.rar
OS: Android 10
Flash File Name: UMIDIGI_Power_3_V1.2_20200328.rar
OS: Android 10
Flash File Name: UMIDIGI_Power_3.E_V1.2_20200328.rar
OS: Android 10

Instructions to Install


GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your UMIDIGI Power 3, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your UMIDIGI Power 3

Follow Complete Tutorial

Watch Video Tutorial

I hope you installed the Stock Firmware on UMIDIGI Power 3 successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!


  1. Hi!…
    I’m pretty sure I now own one of these ‘Bricked/Boot Looped’ Power 3 Phones!… It happened whilst simply being in my pocket last week!…
    The alert I see flashing every 5 seconds…

    “Red State
    Your device has failed verification and may not
    work properly.
    Please download boot lounge with correct signature
    or disable verified boot.
    Your device will restart in 5 seconds.”

    Will the above you mentioned help me unlock my phone and which software should I install to my PC first to help me then install the update files to the phone??… I’ve checked everywhere including with very little luck!… HELP!!…

  2. hi, im also one of the owner of “brick” umidigi power 3 its in orange state and its been restarting every 5 second

    orange state
    your device have been unlocked and cant be trusted .
    your device will boot in 5 seconds

    the umidigi power 3 community if there are any have no tutorial on the net, compared to other phones, i need help :'(

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.