UMIDIGI Bison X10 Firmware Flash File (Stock ROM)

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your UMIDIGI Bison X10 then you can easily install the firmware flash file on it. Since UMIDIGI Bison X10 is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your UMIDIGI Bison X10 device. On this page, we will guide you on how to flash the firmware file on UMIDIGI Bison X10 using the flash tool.

The most smartphone gets hard brick because of the carelessness of their users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with UMIDIGI Bison X10 users. But don’t worry, as installing Stock ROM on UMIDIGI Bison X10 is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick UMIDIGI Bison X10 back to the previous working condition.

UMIDIGI Bison X10 Firmware Flash File

UMIDIGI Bison X10 Firmware Flash File Guide

Remember this guide is also very much needed in case of upgrading or downgrading the firmware on UMIDIGI Bison X10. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading UMIDIGI Bison X10 using this guide.

As we said above – installing a firmware file on UMIDIGI Bison X10 is no rocket science. The actual process of flashing Stock Firmware on UMIDIGI Bison X10 is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on UMIDIGI Bison X10 using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Advantage Of UMIDIGI Bison X10 Stock Firmware:

  • Flash Stock To Unbrick your UMIDIGI Bison X10
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade UMIDIGI Bison X10
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on UMIDIGI Bison X10
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide

Firmware Details:

  • Device Supported: UMIDIGI Bison X10
  • Tool Supported: SP Flash Tool
  • Gapps Included
  • Processor: MediaTek
  • OS: Android 11

Steps to Install Stock Firmware on UMIDIGI Bison X10

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites

UMIDIGI Bison X10 Flash Files

Software Details Download Link
Flash File Name: UMIDIGI_BISONX10_V1-0_20210929.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10-E_V1-0_20211008.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10_V1-0_20211026.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10-RU_V1-0_20211028.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10-TR_V1-0_20211028.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10_V1-0_20211111.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10-E_V1-0_20211201.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10_V1-0_20211211.rar
OS: Android 11
Download
Flash File Name: UMIDIGI_BISONX10-E_V1-0_20211224.rar
OS: Android 11
Download

Instructions to Install

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your UMIDIGI Bison X10, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your UMIDIGI Bison X10

Follow Complete Tutorial

Watch Video Tutorial

I hope you installed the Stock Firmware on UMIDIGI Bison X10 successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.