UMIDIGI S5 Pro Firmware Flash File (Stock ROM)

Android always opens the door to various possibilities such as flashing custom ROM or kernel or APK modding etc. So if you have accidentally bricked your UMIDIGI S5 Pro then you can easily install the firmware flash file on it. Since UMIDIGI S5 Pro is having a MediaTek processor, you have to use the SP Flash tool in order to flash the Stock ROM image on your UMIDIGI S5 Pro device. On this page, we will guide you on how to flash the firmware file on UMIDIGI S5 Pro using the flash tool.

Most smartphone gets hard brick because of the carelessness of their users. Most users try to root their devices to flash them with infected files. As a result, their devices get a hard brick, and then they have to flash firmware files back on their device. This is very true with UMIDIGI S5 Pro users. But don’t worry, as installing Stock ROM on UMIDIGI S5 Pro is no rocket science. It’s very easy and we will guide you through each step of the process. By following this guide, you can restore or unbrick UMIDIGI S5 Pro back to the previous working condition.

UMIDIGI S5 Pro Firmware Flash File

UMiDIGI S5 Pro Device Overview

The UMiDIGI S5 Pro sports a 6.39 inch AMOLED display with a Full HD+ resolution. This display is in the 19:5:9 aspect ratio, a screen to body ratio of 93.1 percent, a pixel density of 398 Pixel Per Inch (PPI), a resolution of 1080 x 2340 pixels, and it supports ten fingers at a time. The brand doesn’t reveal which version of the Gorilla Glass they are using, and it a full display smartphone. This AMOLED display also comes with an in-display fingerprint scanner.

Underneath the UMiDIGI S5 Pro, it sports the MediaTek Helio G90T, which is built on the 12nm process. This SoC comes with two Cortex A76 cores, which clocks at 2.05GHz and other 6 Cortex A55 cores, which clock at 2.0GHz. To the GPU side, this SoC comes with the Mali G76 MC4 GPU. That said, coming to the variants in which it is available, it is available only in a single variant, i.e., with 6GB of LPDDR4x RAM. It also comes with 256GB of UFS 2.1 onboard storage. Further, this is also expandable via the micro SD card up to 256GB.

Talking about the optics, the UMiDIGI S5 Pro sports a quad rear camera setup. This consists of a primary 48MP Sony IMX 586 sensor with an aperture value of f/1.79, and PDAF. This primary sensor, coupled with a 16MP secondary ultra wide-angle sensor with a field of view of 120°. Further, it has a tertiary 5MP depth sensor, and finally, it has a quaternary 5MP macro sensor with a 2cm macro distance. To the front, it has a 16MP sensor that is placed in a motorized unit.

The UMiDIGI S5 Pro runs on the latest Android 10. It provides you a pure stock android experience and with privacy controls. The UMiDIGI S5 Pro packs a 4,680 mAh battery with support for 18W Quick Charge 3.0 fast charging. Connectivity options include Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct, hotspot. Bluetooth 10, A2DP, LE, aptX HD. GPS with dual-band A-GPS, GLONASS, BDS, GALILEO, QZSS. FM radio USB 2.0, Type-C 1.0 reversible connector, USB On-The-Go. The device is available in two color options, namely the Cosmic Black and Ocean Blue.

UMIDIGI S5 Pro Firmware Flash File Guide

Remember this guide is also very much needed in case of upgrading or downgrading the firmware on UMIDIGI S5 Pro. First of all, download the software, Smartphone Flash Tool on your PC and then flash your phone back to Stock ROM. We request you to read the steps carefully before upgrading UMIDIGI S5 Pro using this guide.

As we said above – installing a firmware file on UMIDIGI S5 Pro is no rocket science. The actual process of flashing Stock Firmware on UMIDIGI S5 Pro is very easy. All you have to do is simply download the below-given firmware files and tools on your PC and then follow the given instruction to install the Stock ROM on UMIDIGI S5 Pro using SP Flash Tool. Yes, this guide is also helpful to recover, unroot or fix any software malfunctioning problem.

Advantage Of UMIDIGI S5 Pro Stock Firmware:

  • Flash Stock To Unbrick your UMIDIGI S5 Pro
  • Flash Stock ROM to Fix the boot loop problem
  • Upgrade and Downgrade UMIDIGI S5 Pro
  • Unroot or Fix Bugs on your phone
  • To fix the lag or stutter on UMIDIGI S5 Pro
  • By flashing Stock ROM, you can solve software problems.
  • Revert back to stock to gain your warranty.
  • Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
  • To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide

Firmware Details:

  • Device Supported: UMIDIGI S5 Pro
  • Tool Supported: SP Flash Tool
  • Gapps Included
  • Processor: MediaTek
  • OS: Android 10

Steps to Install Stock Firmware on UMIDIGI S5 Pro

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites

UMIDIGI S5 Pro Flash Files

Software Details Download Link
Flash File Name: Umidigi_S5_Pro_MT6785_v3.01_20200422.zip
OS: Android 10
Download
Flash File Name: UMIDIGI_S5Pro.E_20200422.V3.01.rar
OS: Android 10
Download
Flash File Name: UMIDIGI_S5Pro_20200702.V3.02.rar
OS: Android 10
Download
Flash File Name: UMIDIGI_S5Pro.E_20200702.V3.02.rar
OS: Android 10
Download
Flash File Name: UMIDIGI_S5Pro.E_20201130.V3.04.rar
OS: Android 10
Download
Flash File Name: UMIDIGI_S5Pro_20210107.V3.04.rar
OS: Android 10
Download

Instructions to Install

Disclaimer:

GetDroidTips will not be responsible for any kind of hardware or software damage to your device while or after you follow this guide. Install non-official firmware on your device at your own risk.

Now, without wasting any more time, let’s jump into the firmware installation steps below:

  1. Make sure you follow and download all the required files and flash tools on your PC.
  2. Open the flash tool exe file to open the SP Flash Tool User Interface
  3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  4. Once you load the file, click the Download button
  5. To start the upgrade process of stock ROM on your UMIDIGI S5 Pro, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  6. When the phone connects, your device will start upgrading the stock firmware
  7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
  8. That’s it! You can reboot your UMIDIGI S5 Pro

Follow Complete Tutorial

Watch Video Tutorial

I hope you installed the Stock Firmware on UMIDIGI S5 Pro successfully. If you’re facing any kind of issue during the flashing process, then let us know via the comment section. We will be happy to assist you. Thanks for stopping by and have a nice day!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.