Easy Method To Root Tecno F1 Using Magisk [No TWRP needed]

Here in this guide, we will help you to flash the magisk to root Tecno F1. Read our step by step guide properly!

Who doesn’t want to get the most of his Android device..?! Getting the superuser access through the root and to be able to control various aspects like clock, access to cache etc. are few of the various possibilities that we can explore. When we mention root access, this means we need to perform a certain modification that will root our phone and we will have access to the root directory of our device. In this post, we will show you how to root Tecno F1.

Talking about the specifications, Tecno F1 features a 5-inch IPS display with a screen resolution of 854 × 480 pixels. It is powered by MediaTek MT6580 Processor coupled with 512MB of RAM. The phone packs 8GB internal memory with an expandable storage support of 32GB via microSD card. The camera on the Tecno F1 comes with 5MP rear camera with LED dual-tone flash and 2MP front camera for selfies. It is backed by a Removable 2000 mAh Lithium-Ion battery.

We will use the Magisk by patching the stock boot image and flash that to your boot partition. All you need to do is download the patched image file from Magisk Manager and flash it.

Mostly uninitiated people compare rooting with hacking which is not correct. The purpose in both contexts is quite different. Hacking is more like breaking into someone’s else system illegally, whereas rooting is mostly done by the owner of an Android device to gain superuser advantages of the device.

Steps To Root Tecno F1 Using Magisk

Remember,

• After Rooting, it may void the warranty of your phone.
• Rooting will block the OTA updates

Before moving on to the flashing steps, you need to follow a few,

Pre-Requisites

• Make sure to have enough battery charge on your phone to avoid interruption during the patch installation.
• Before performing any modification take backup of your device data.
• This image file is strictly for Tecno F1 only. Do not use it on any other OnePlus or other Android devices.
• You need PC/Laptop with a micro USB cable to connect.
• Make sure that you download all the required files on your PC/Laptop

1. How to Extract and Patch Boot.image using Magisk?

• First of all, download and extract the ROM to your PC.
• Attach your device via USB cable and copy only the boot.img file from the extracted folder to your device storage
• Launch Magisk Manager. When a popup appears asking to install Magisk, select INSTALL and choose install again.
• Tap on “Patch Boot Image File”.
  

  

• Navigate to internal storage and select your phone’s boot image that you transferred earlier.
• Wait for a couple of seconds. Magisk will start patching the boot image.
• Once the boot image has been patched, copy the “patched_boot.img” from the internal storage and replace it in the same extracted ROM folder on your PC.

Now you can follow the second step to flash the patched boot image file.