If you’re looking for official stock firmware for Xiaomi Mi 9 SE devices then this is the right place to look for! Here you find all the official stock firmware collections for Xiaomi Mi 9 SE. Xiaomi Mi 9 SE is a successor of the Xiaomi Mi 9 device. So some users confuse between the two devices and flash the wrong stock ROM which results in a damaged device. But no worries as in this post, we will be giving Xiaomi Mi 9 SE stock firmware links.
Xiaomi Mi 9 SE was launched in February this year and customers are going crazy over this phone. It’s a successor of Xiaomi Mi 9 and it comes with updated features and a beautiful waterdrop notch display. It is powered by the latest Android 9 and supports power charging as well.
Also Read
Page Contents
Xiaomi Mi 9 SE Stock Firmware | Flash Stock ROM
Android is a robust operating system that allows the user to customize the OS according to their needs. However, sometimes these customizations can be deadly and can brick the phone to a point of no return. In such a situation, the best way out is installing stock firmware on your device.
One must be very careful while choosing stock firmware/ROM. As flashing the wrong firmware can damage your device permanently. This case has happened with many customers since Xiaomi Mi 9 SE and Xiaomi Mi 9 sounds the same. However, their stock firmware is not the same.
Down below, you will find the stock firmware links for Xiaomi Mi 9 SE. If you want to download the stock firmware for Xiaomi Mi 9 instead, you can go here. But before downloading the stock firmware, cross-check the device specifications to make sure you’re downloading the right firmware for your device.
Device Specifications
Device Name | Xiaomi Mi 9 SE |
Screen | 5.97 inches, 1080×2340 pixels |
Processor | Qualcomm Snapdragon 712 |
RAM/ROM | 6GB RAM/64GB ROM |
Battery | Non-removable Li-Po 3300 mAh battery |
Camera | 48-megapixel primary camera with an f/1.75 aperture, 8-megapixel camera with an f/2.4 aperture, 13-megapixel camera with an f/2.4 aperture |
Stock Firmware Advantages:
- Flash Stock To Unbrick your Xiaomi Mi 9 SE
- Flash Stock ROM to Fix the boot loop problem
- Upgrade and Downgrade Xiaomi Mi 9 SE
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Xiaomi Mi 9 SE
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
List of Xiaomi Mi 9 SE Stock Firmware Collections:
OS build | Stable ROM |
V12.5.1.0.RFBMIXM | Global Stable ROM |
V12.5.1.0.RFBEUXM | Europe Stable ROM |
V12.5.4.0.RFBCNXM
|
China Stable ROM |
V12.0.3.0.QFBRUXM | Russia Stable ROM |
V12.0.4.0.QFBMIXM
|
Global Stable ROM |
V12.0.4.0.QFBEUXM
|
Europe Stable ROM |
V12.0.2.0.QFBRUXM | Russia Stable ROM |
V12.0.3.0.QFBCNXM | China Stable ROM |
V12.0.3.0.QFBCNXM | Europe Stable ROM |
V12.0.1.0.QFBEUXM
|
Europe Stable ROM |
V12.0.2.0.QFBCNXM
|
China Stable ROM |
V11.0.6.0.QFBEUXM | Europe Stable ROM |
V10.3.17.0.PEMEUXM | Europe Stable ROM |
V10.2.5.0.PFBRUXM | Russian Stable ROM |
V10.3.3.0.PFBCNXM | China Stable ROM |
V10.3.1.0.PFBEUXM | Europe Stable ROM |
V10.3.1.0.PFBMIXM | Global Stable ROM |
V10.2.9.0.PFBEUXM | Europe Stable ROM |
V10.2.2.0.PFBMIXM | Global Stable ROM |
V10.2.5.0.PFBCNXM | China Stable ROM |
V11.0.6.0.PFBRUXM | Russian Stable ROM |
V11.0.1.0.QFBCNXM | Global Stable ROM |
V10.3.11.0.PFBEUXM | Europe Stable ROM |
V11.0.5.0.PFBCNXM | China Stable ROM |
V11.0.4.0.PFBRUXM | Russian Stable ROM |
V11.0.3.0.PFBCNXM | China Stable ROM |
V10.3.9.0.PFBEUXM | Europe Stable ROM |
V10.3.4.0.PFBMIXM | Global Stable ROM |
V10.3.4.0.PFBEUXM | Europe Stable ROM |
V10.3.3.0.PFBMIXM | Global Stable ROM |
V10.2.11.0.PFBCNXM | China Stable ROM |
V11.0.4.0.PFBMIXM | Global Stable ROM |
V11.0.6.0.PFBRUXM | Russian Stable ROM |
V11.0.5.0.PFBCNXM | China Stable ROM |
V11.0.2.0.QFBCNXM | Android 10 China |
V11.0.2.0.QFBMIXM | Stable Android 10 |
V11.0.2.0.QFBRUXM | Russia Stable ROM |
V11.0.2.0.QFBEUXM | Europe Android 10 |
V11.0.3.0.QFBMIXM | Global Stable ROM |
V11.0.5.0.QFBEUXM | Europe Stable ROM |
V11.0.6.0.QFBEUXM | Europe Stable ROM |
V12.0.1.0.QFBCNXM | China Stable ROM |
How to install Stock Firmware on Xiaomi Mi 9 SE
Stock firmware is the factory firmware that comes pre-installed on the device. Installing Stock firmware on your Xiaomi Mi 9 SE will get rid of any software problem you might have with your device. Today in this guide we will help you to install stock firmware in Xiaomi Mi 9 SE. But before that have a look at the prerequisites.
Pre-Requisites:
- This ROM is supported only for Xiaomi Mi 9 SE.
- You need a Xiaomi device with an unlocked bootloader.
- You need a Windows PC with ADB & Fastboot installed.
- Download Latest Mi Flash Tool and extract it on your PC.
- Download and Install Xiaomi USB drivers.
- Charge your phone to at least 50% before upgrading your phone.
- Take a complete backup of your phone data [Follow any method]
- How to Backup Your Android Phone Without ROOT
- How to Backup Complete Stock or Custom ROM using TWRP recovery
- Backup Your Android Apps and Data with Titanium Backup
- How to Backup Your Android Phone Directly to PC with TWRP!!
- How to Backup Your Data on Android device
- If you already have TWRP: then you can Create and Restore Nandroid Backup via TWRP
warning
GetDroidTips will not be responsible for any internal/external damages to the device that may happen while/after following this guide. Please proceed if you know what you’re doing!
Advertisement
Please follow this link to get a detailed guide on how to install stock firmware on Xiaomi Mi 9 SE.
Guide to Install firmware on Xiaomi Mi 9 SEI hope you installed the Stock ROM on Xiaomi Mi 9 SE successfully. If it worked for you, then kindly leave a positive comment. If you’re facing any issue with the process, then let us know via comment, we will help you in every way possible.